User manual SILVERCREST SL 65

[. . . ] Overview of Equipment Front side of the receiver Overview of Equipment Front side of the receiver 1 2 3 4 5 6 7 8 9 10 LED display ­ LED POWER OK MENU VOL + VOL ­ CH + CH ­ POWER Shows channel location or ttime Infrared sensor for the signal of the remote control LED is illuminated if the receiver is switched on or in standby mode Confirm Invokes main menu Increases volume Cursor moves to the right Decreases volume Cursor moves to the left Switches to the next higher channel location Cursor moves up Switches to the next lower channel location Cursor moves down Switches on and switches to the standby mode Rear side of the receiver Rear side of the receiver Remote control 1 2 3 4 5 6 7 8 9 10 11 12 13 RF OUT LNB IN VCR TV 100 ­ 240 V~ 50/60 Hz, 30 W 0/1 S-VHS COAXIAL OPTICAL RS 232 VIDEO AUDIO L AUDIO R LNB connection for a second satellite receiver LNB connection for the antenna cable SCART connection for the video set SCART connection for the TV set Mains connection Mains switch S-Video connection Digital coaxial audio output Digital optical audio output Serial port Analog video connection Left analog audio connection Right analog audio connection Remote control 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 POWER ZOOM LIST TIMER TEXT MUTE M/P V+ OK CH q FAV RECALL PAUSE INFO 0­9 P­ P+ V­ CH p MENU EXIT AUDIO EPG TV/SAT TV/RADIO Switches on and switches to the standby mode Enhances the TV image Shows favourits list (groups) Timer Teletext Turns off sound Without function Increases volume/cursor moves to the right Confirms menu or menu item Switches to the next lower channel location / cursor moves down Invokes favourits list Switches to previously selected channel Stills the frame Displays reception data of the current channel Selects channel directly, numerical input Scrolls pages down in menus Scrolls pages up in menus Decreases volume/cursor moves to the left Switches to the next higher channel location / cursor moves up Invokes main menu Exits menu or menu item Changes audio mode Electronic Program Guide (if offered) Switches between terrestrial and satellite antenna Switches between TV and radio mode -3- COMAG_BDA_SL65_S3_GB. indd Abs3:3 12. 05. 2005 17:47:17 Uhr Digital Satellite Receiver SL 65 Operating Manual Version 1, as of 03. 05. 2005 Preface This operating manual will help you in the · appropriate, · safe and · favorable usage of the digital satellite receiver, in short, the "receiver". We assume that the user of the receiver has overall knowledge regarding the handling of audio and video equipment. Each person who · installs, · connects, · operates, · cleans or · disposes of this receiver must be familiar with the entire content of this operating manual. Always keep this operating manual in the proximity of the receiver. Style Features Specific style features have been given in different sections of the operating manual. [. . . ] It consists of main menus and their submenus. By pressing the "EXIT" key, you can exit the menu again. Orientation within the menus Top left: menu name Right: Sub-menu or menu items Bottom left: Miniature view of the set channels Bottom right: The information bar indicates the keys with which you can move yourself within the current menu. 27 Screen-Inlays while Switching a Channel When a channel is switched, an information bar is inlayed on the screen for 5 seconds. In this information bar, you will find the following indications: Date Current time Audio language Channel location Received channel The satellite through which signals are received TXT symbol EPG Heart symbol "TXT" is displayed when the selected broadcasting station offers Delete. "EPG" is displayed when the selected broadcasting station offers the program information. The heart symbol is displayed when you have included the program in your favorites list. 28 Menu Structure Main menu Channel Manager Sub-menu Channel assignation Channel groups Sort channels New channel Edit channels Delete All System installation Add satellite Edit satellite Delete satellite Automatic scan Manual scan Change transponder Delete transponder Satellite scan System configuration System setup DISEqC motor setup Boot channel Company Setting Description See following text See following text See following text Setup of new channels Editing of PID channels See following text Adding satellites manually Modifying settings of the existing satellites Delete settings made for the satellite Adjusting settings for the satellite automatically Direct entry of the frequency See following text See following text See following text See following text See following text Setting boot channel See following text 29 Main menu Other Sub-menu Games Signal display Serial update Satellite update Keyboard layout Version Description See following text Information on satellite and signal strength Activate RS232 Software update via satellite Astra 19, 2° East Help texts on the functions of some keys on the remote control Information on hardware and software of the receiver Menu Navigation For switching between the sub-menus press the arrow keys "CH "and "CH L ". The selected sub-menu is marked in yellow. Press the "OK" key to confirm the marked sub-menu. Menu items of the selected sub-menu are displayed. Press the "CH "and "CH L "arrow keys to switch from one submenu to the next one. The selected menu item is marked in yellow. Press the "OK" key to confirm the marked sub-menu. Settings for this menu item are displayed. Most menu items are displayed on the screen in a divided format. On the right you can see the currently set data. 30 Press the "CH " and "CH L "arrow keys to switch from one setting to the next one. The selected setting is marked in yellow. Press the "OK" key to confirm the marked setting. You can: switch between the options by using the arrow keys "V+" or "V­" mark the desired option with the arrow keys "CH "and "CH L " enter numbers by means of the numeric keys if the setting requires a numeric entry. Press the "OK" key to confirm the setting. Press the "EXIT" key to return to the next higher menu level. Press the "EXIT" key to exit the main menu. The screen menu is closed and the screen is in the TV mode. 31 Edit channel list For editing the channel list, go to the sub-menu "Channel assignation" (via Menu, Channel admin. ) The beginning of the list of available channels is displayed. [. . . ] 47 No sound or image, but receiver menus are displayed The numerical display of the receiver is illuminated, but no image on the TV set. Poor image, blocking error, formation of small blocks The remote control does not work Batteries are exhausted. Remote control is not directed properly. Aim the remote control towards the front side of the receiver and ensure that there is no obstacle between the remoter control and the receiver. If a malfunction is not rectified in spite of this, please contact your specialized dealer or the manufacturer. Disposal Never throw the digital satellite receiver or the batteries in normal household waste. [. . . ]