User manual SILVERCREST SNHT 1.5 B2

[. . . ] The manufacturer assumes no responsibility for damage caused by failure to observe these instructions, improper use, incompetent repairs, making unauthorised modifications or for using unapproved replacement parts. In these extant operating instructions the following warnings are used: WARNING A warning of this danger level signifies a possible dangerous situation. If the dangerous situation is not avoided it can lead to physical injuries. Pay heed to the instructions in this warning to avoid personal injuries. [. . . ] 2) Insert a battery of the type AA/Mignon/LR06. Pay heed to the correct polarity (indicated in the battery compartment 5)!To do this, place the battery compartment cover 6 at an angle on the battery compartment 5, so that the spot on the battery compartment cover 6 lies under the opened lock on the hand element 4 . Turn the battery compartment cover 6 until the spot lies under the closed lock on the hand element . 1) Remove (if fitted) the comb attachment 7/8 from the cutting head 1. WARNING - RISK OF INJURY Do not insert the cutting head 1 too deeply!NOTICE Ensure that your nostrils are clean. 3) Guide the cutting head 1 carefully into the nostril and slowly turn the appliance so that all nose hair growth is removed. 4) Withdraw the cutting head 1 out of the nostril whilst turning the appliance. 3) To trim all of the hair of the eyebrow, move the comb attachment 7/8 over the eyebrow and against the direction of hair growth. 4) To trim only individual hairs, move the comb attachment 7/8 over the eyebrow and only against these individual hairs. 5) In order to trim hair to just above the skin surface, remove the comb attachment 7/8 and guide the cutting head 1 directly over the skin in the desired areas. WARNING - RISK OF INJURY Do not insert the cutting head 1 too deeply!1) Remove (if fitted) the comb attachment 7/8 from the cutting head 1. 2) Guide the cutting head 1 carefully into the ear. Do not use sharp objects when cleaning the cutting head 1. do not use abrasive , aggressive or chemical cleaning agents. Clean the appliance after every use: To remove hair from the cutting head 1 and the comb attachments 7/8, clean them with the cleaning brush 9. Clean the comb attachments 7/8 under running water. NOTICE Do not use the appliance again until it has completely dried. NOTICE At regular intervals place a few drops of blade oil suitable for razor appliances in the cutting head holder 2, at the latest when the blades no longer run smoothly. For this you need to remove the cutter head holder 2: 1) Turn the cutter head holder 2 anti-clockwise through approx. [. . . ] Utilisations and activities that are advised against or warned against in the operating instructions are to be implicitly avoided. This product is for domestic use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorised service branch, the warranty will become void. Processing of Warranty Claims To ensure the fast processing of your claim, please comply with the following instructions: For all queries please hold ready the item number (e. [. . . ]