User manual SILVERCREST STK 650 A1 ELECTRIC TEA MAKER

[. . . ] If you do, boiling water may spray out and lead to scalds. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. Ensure that the base with the electrical connections does not come into contact with water! [. . . ] The longer the brew is kept warm, the greater is the amount of fluid evaporated, and thus the brew becomes stronger. We therefore recommend that the tea be drunk as soon as possible after brewing. You can interrupt the brew process at any time: For this, place the On/Off switch 8 back into the position "0". If you remove the glass pot 3 from the base 5, the brew process is interrupted. The brew chamber 0 must be positioned with the flattened side towards the handle 2. Insert the plug into a wall power socket and place the On/Off switch 8 at the position "I". the control lamp 4 and the On/Off switch 8 light up. The water is now boiled and forced upwards through the water riser pipe q to flow through the brew chamber 0 and then back into the glass pot 3. After the water has boiled, the appliance automatically switches itself into the keep-warm function. The control lamp 4 goes out, only the On/Off switch 8 continues to glow. As soon as the water cools, the Tea Automat warms the water back up. The control lamp 4 lights up again during this rewarming process. Always first let the glass pot 3 cool down before you pour in fresh cold water for another brewing process!Otherwise, tension may be created in the glass pot 3 and it could shatter. The On/Off switch 8 remains lit, the appliance however does not continue to heat up. Clean the brew system with warm water and a liquid detergent: The brew chamber 0 and the sieve w can be cleaned with the supplied cleaning brush 9. Clean the water riser pipe q with warm water and some detergent. After cleaning it, rinse the whole brewing system well with clear water so that no detergent residues remain within it. the appliance could also be irreparably damaged!To obtain an optimal result with every brew process the appliance should be cleaned after every use. Regular use of the Tea Automat could perhaps cause it take on aromas from strongly aromatic teas and pass them to other tea sorts. Clean the glass pot 3 of the Tea Automat with a moist cloth. [. . . ] If you do not intend to use the appliance for a long time, wrap the power cable around the retainer on the underside of the base 5. Store the appliance in a dry and dust free location. Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC. [. . . ]