User manual SIM2 C3X

[. . . ] 46. 0533. 000 User and Installation Manual C3X - C3X LITE 1 TELECOMANDO E TASTIERA DI CONTROLLO BACK LIGHT Turn on the back light LIGHT STAND-BY Switches off to stand-by 0-9 KEYS Switch on from stand-by mode and allow direct source selection ESCAPE Deactivates the On Screen Menu UP/DOWN/LEFT/RIGHT ARROW KEYS Navigate through andmake adjustement to the On Screen Menu MENU + Activates the On Screen Display menus Navigate menu pages MEMORIES Activates memories menu SOURCE Display the source Selection Menu BLANK SCREEN MENU Activates the On Screen Display Menu Navigates menu pages FREEZE Freezes a moving picture ZOOM Active le réglage du zoom de l'objectif. ZOOM F1 F2 FOCUS Selects focus lens adjustement AUTO Select Auto Adjust (automatic optimisation of the displayed image) FOCUS INFO Displays the selected source information and the projectors status VCR Improves the video recorder signals quality ASPECT Selects image Aspect ratio , , , Switches off to stand-by Activates the On Screen Display Menu Navigates menu pages Navigate through andmake adjustement to the On Screen Menu Deactivates the On Screen Menu Display the source Selection Menu MENU ESC SOURCE 1 INTRODUCTION Thanks to the new optical system based on three chip DMDTM, the c3X allows to take advantage from DLPTM technology, the Texas Instruments technology. Each of the three DMDTM chip is dedicated to the modulation of one of the primary colors coming from the optical prism, the refl ected light, after combination by a second prism, is projected outside using an appropriate lens system. The technology of the c3X allows to obtain images without rainbow effect or any other type of artefact, in order to enjoy an even more realistic images. The large number of inputs available (1 composite Video inputs, 1 SVideo inputs, component or RGB inputs, 1 graphic RGB inputs, 1 DVI-D input, 1 HDMITM Input) ensures the system supports a wide variety of analogue and digital sources: DVD players, VcRs, satellite and terrestrial receivers, computers, game consoles, video cameras, etc. [. . . ] To toggle between NORMAL, VcR1 mode and VcR mode press on the remote control. NOISE REDUCTION This adjustments allows to choose the filter value for noise reduction purposes. As soon as this option is selected on the menu, the image is divided in two parts. In the left side the image is not altered by the filter, in the right part the filter is activated. This allows you to compare the effect of the filter. It is possible to deactivated the filter (NOT AcTIVE), to use the automatic adjustments (AUTO) or to manually select (MANUAL) the value suitable for the image with the VALUE adjustment. In case of using the VALUE adjustement, it is enoght to select to cursor below and set the value with the e keys of the remote control. Associated to the NOISE REDUcTION there is the possibility to use the specific function (FLESH TONE cORREcTION) to make skin tone more natural. Often the use of noise reduction filter slightly degrades the image in those areas where skin tones are visible. With the use of this function it is possible to maintain an excellent image quality throughout the entire projected image. IMAGE This menu features adjustments relating to picture position, aspect ratio, etc. ASPECT This adjustment allows you to change the dimensions and aspect ratio (relationship between width and height) of the displayed image. There are five preset aspects available and three personalised aspects (with user-settable parameters). You can select a different aspect for each source: the selected aspect ratio will be automatically called the next time the 17 relative source is called. You can also select the required aspect ratio by repeatedly pressing the key, or by pressing and a numerical key (1. . . 8). NORMAL: projects the image occupying the full height of the screen while maintaining the aspect ratio of the input signal. When the input signal aspect ratio is 4:3 black vertical bands are displayed on the right and left of the picture. ANAMORPHIc: allows a 16:9 picture to be displayed correctly. LETTERBOX: serves to display 4:3 letterbox image (with source signal having black bands above and below the picture) so that it fills the 16:9 screen and maintains the correct aspect ratio. PANORAMIc: this aspect stretches the 4:3 image, slightly cropping the upper and lower parts. Panoramic is ideal for displaying a 4:3 image on the 16:9 screen of the Display. PIXEL TO PIXEL: this aspect displays the image as it is input without adapting it to the screen. [. . . ] Ensure the VcR mode is active in the Picture menu. · Adjust the horizontal and vertical position of projected image by selecting POSITION on the IMAGE ADJUSTMENTS menu. · Adjust the width and height of image, selecting ASPEcT in the IMAGE ADJUSTMENTS menu. · Adjust the Overscan value in the IMAGE/OVERScAN menu. Image too dark, too pale or unnaturally coloured · Verify compatibility of video/graphic signals with technical specifications of your projector. [. . . ]