User manual SIMA CT-100

[. . . ] GoDVD! TM Digital Video Enhancer and Duplicator Model CT-100 User Manual Sima Products Corporation 140 Pennsylvania Ave Bldg #5 Oakmont, PA 15139 800-345-7462 www. simacorp. com e-mail us at custserv@simacorp. com © 2005 Sima Products Corporation PN21718 www. simacorp. com Notice: Use of this product for unauthorized duplication of copyrighted material from DVD, VHS or other media is strictly prohibited under the federal Copyright laws unless the copy qualifies as a fair use under the Copyright laws. FCC Information This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict acceptance with the manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] #5 Oakmont, PA 15139 This warranty is void if any defects are caused by abuse, misuse, negligence or unauthorized repairs. All liability for incidental or consequential damages is specifically excluded. Some states do not allow for the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. Troubleshooting Device does not operate Possible Solutions · · · Has correct mode (AV, Line, Tuner, etc. ) been set on the VCR or DVD Correct connecting cable?Have the RCA cables been mixed up at the input and output of the VCR/DVD?Is the connecting cable of the plug-in adapter damaged?Make sure VCR/TV is not set to channel 3 or 4 and that AV, Line or appropriate mode is selected. Congratulations on your purchase of Sima's GoDVD!(Model CT-100) This package includes: (1) Go-DVD!- Model CT-100, (1) RCA style Video Cable (1) 7. 5V, 500 mA AC adapter and This Instruction Manual Connection Notes: First, connect your player (VCR/DVD) to your recorder (VCR/DVD) to your TV. Verify that your hook-up cables are working. Then disconnect the yellow video cable and connect the CT-100 as shown below. No picture · · · Picture rolling · TV does not support 50/60 Hz scan rates. Specifications Video Format - NTSC (FSC= 3, 58 MHz) INPUT CONNECTORS Composite Video (RCA jack) x 1 Power: DC 7. 5V 500mA OUTPUT CONNECTORS Composite Video (RCA jack) x 1 Dimensions: 4. 5"(W) x 2. 5"(L) x . 75"(H) After connecting the CT-100 the red light will turn on showing that the CT-100 is powered up and in standby mode. Press the POWER button to turn the unit on. Operation 1. Verify that player/recorder connections work without CT-100. Connect the CT-100 unit as shown on page 3. [. . . ] If unsure which video enhancement mode is selected, look at your video monitor while toggling through the options. Red light = standby 5. Select A/V input on your recording VCR or DVD and press RECORD. Then press PLAY on your playback device. Red/Green Indicator Light Power Button Video Mode Mode Sequence [. . . ]