User manual SIMA RCW-102

[. . . ] However, you will still have to set the correct time zone. (Note: The RCW will not automatically adjust to a new time zone if you are traveling. You must change the time zone setting to continue to keep the exact time. ) TIME ZONE SETTING 1. Press the MODE button three times and the time zone will be displayed. [. . . ] Press the SET button one more time decrease the numbers at a faster rate. Day of Week SET Pressing and holding the SET button for three seconds enters the manual setup mode. Different settings can be accessed by pressing the SET button repeatedly . MODE Press the MODE button to enter the alarm-setting menu. EL (RCW-101 only) Pressing the EL button will activate the RCW backlight. SETTING ALARM 1 & ALARM 2 The RCW has two alarms that can be activated, AL1 and AL2. Pressing any button will turn the alarm sound off once activated. If no button is pushed, it will automatically shut off after two minutes. 1) Press the MODE button once for AL1, twice for AL2. The icon will blink on the right side of the LCD. 2) Press and hold the SET button for three seconds. The hour section of the clock will begin blinking. 3) Press the RECEIVE button to increase the hour or the LIGHT button to decrease the hour. 4) Press the SET button to move to the minute section of the clock. 5) Press the RECEIVE button to increase the minute or the LIGHT button to decrease the minute. 6) Press the SET button to advance to the ON / OFF setting. 7) Press the RECEIVE button to set the alarm to ON or OFF. The icon for ON/OFF is located above the second portion of the clock (on=ON, oF=OFF). 8) The RCW will return to normal operation in approximately 15 seconds. 4 3 SET 5 6 7 RECEIVE 2 1 MODE 8 LIGHT 9 SIGNAL SEARCH AUTOMATIC SEARCH The RCW is designed to receive the NIST signal automatically every night at 3:00AM. The RCW will synchronize the time and date with the NIST broadcast signal from Fort Collins, CO. Note: You must set the watch manually the first time for it to auto synch during the night. RECEPTION STATUS If the NIST broadcast is successfully received, the tower icon in the upper left corner of the LCD will remain "on" all day. The RCW will search for the signal again at 3:00AM. [. . . ] Your RCW is a delicate instrument and requires special tools for changing the battery; therefore, Sima strongly recommends that qualified personnel only change the battery. Automatic reception of the NIST signal will activate once the battery is replaced. LIMITED WARRANTY Sima Products Corp. ("Sima") warrants that if the accompanying product proves to be defective to the original purchaser in material or workmanship within 90 days from the original retail purchase, Sima will, at Sima's option, either repair or replace same without charge (but no cash refund will be made). What you must do to enforce Warranty: You must deliver, mail or ship the product, together with both the original bill of sale and this limited Warranty statement as proof of warranty coverage to: Sima Products Corp. [. . . ]