User manual SIMA SED-EM

[. . . ] DO NOT short circuit the output terminal or contacts. DO NOT drop the unit, a jolt can cause permanent damage and is not covered by the warranty If the charger must be cleaned, be sure it is unplugged. Wipe the unit with a clean cloth, lightly dampened with mild detergent. [. . . ] Use a clean cloth, lightly dampened with rubbing alcohol to clean the metal contacts. If you have trouble installing your battery or if it is not listed on this chart, do not call the store where you purchased the SED-EM. Call Sima customer service at 800-345-7462 Battery Chart Brand Canon Canon Canon Canon Hitachi Hitachi Hitachi JVC JVC JVC Panasonic Panasonic Panasonic RCA RCA Sharp Samsung Samsung SONY SONY SONY SONY SONY Universal Battery Charger for use with Camcorders Model SED-EM Tray Base A C C Base A C Base Base A A Base A C C C Base A Base C C Base A A A A A Volt 6V 7. 2V 7. 2V 7. 2V 6V 7. 2V 7. 2V 6V 7. 2V 7. 2V 6V 7. 2V 7. 2V 6V 7. 2V 6V 7. 2V 7. 2V 6V 7. 2V 7. 2V 7. 2V 7. 2V Batt. type NiCad/NiMH Lithium Ion Lithium Ion Lithium Ion NiCad/NiMH Lithium Ion Lithium Ion NiCad/NiMH Lithium Ion Lithium Ion NiCad/NiMH Lithium Ion Lithium Ion NiCad/NiMH Lithium Ion NiCad/NiMH Lithium Ion Lithium Ion NiCad/NiMH Lithium Ion Lithium Ion Lithium Ion Lithium Ion Model Number BP-E77/711/714/718/722/729 BP-80/85 BP-608/617 BP-911/914/915/924/927/930/941/945 VM-BP82/82A/83/84/84A VM-BPL13A/27A/30A/60A DZ-BP16/28 BN-V11U/12U/14U/140U/22U/50U/60U BN-V20U/25U BN-V607/615U BN-V812/814U PV-BP15/17/18/ VW-VBS1E/S2E VW-VBD1/PV-BP5/AG-BP25 CGR-D120/220/320/S602/ PV-BP8A/VW-VBD20 CGA_DU07/14/21 BB-45/75L/060/120/FB120/1260 BB-55L/65L/85L BT-80 SB-L110/220 SB-L160/320/480 NP-55/66/67/68/77/78/98 NP-FF50/70 NP-F100/200/300 NP-F330/530/550/730/730H/750/750 SP/930/950/960 NP-FM30/50/70/90/91/QM50/70/90 Works with these camcorders: Sony JVC RCA Canon Sharp Hitachi & more!www. simacorp. com 800-345-7462 Trouble Shooting Problem Possible Cause/Solution Confirm the AC or cigarette adapter is firmly No Indicator connected at both ends. Confirm that wall outlet is Lightswith battery mounted working. Check fuse in car cord (un-screw tip of cigarette lighter adapter). · Battery is already fully charged. · Battery mounted incorrectly; remove and re-mount battery. Hissing noise in Normal operation due to advanced switching Charging Mode circuitry. Includes 3 adapter trays to charge Lithium - ion, Ni-Cad and NIMH batteries Includes AC & DC adapters Warranty Statement Sima Products Corporation ("Company") warrants that if this product proves to be defective to the original purchaser in material or workmanship within 90 days from the date of original retail purchase, the company will, at the company's option, either repair or replace same without charge (but no cash refund will be made). To enforce this warranty, ship your unit, freight pre-paid, including reasonable proof of date and place of purchase and description of problem to: Attn: Customer Service c/o Sima Products Corporation 140 Pennsylvania Ave. Consult the battery chart in this manual to determine which adapter plate your camera or camcorder battery requires. Charging the Battery As soon as the battery is properly mounted, charging begins as indicated by the steady red light on the Charge Status indicator. (Fig. 1 below) When charging is complete, the green Full Status indicator will turn on (fig. At this point, the battery can be removed for use. Removing the battery at this point will not harm it. It is recommended that you leave the battery connected tot he charger for another 30 minutes to ensure a full or "topped off" charge SLIDE INSERT TO LOCK Base Unit and Trays MODEL : UDC UNIVERSAL DIGITAL CHARGER For Hitachi 6 volt To install the adapter trays Step 1. Place the adapter tray onto the base unit. For Canon 6 volt 1 Step 2. Align the arrow on the tray to the INSERT dot on the base unit. + + Charge Full Discharge Charge Full Discharge Charge Full Discharge 2 Plate C Plate A 1 2 3 4 5 Plate 2 INSERT SLIDE TO LOCK 3 Fig. 3 Press to discharge Discharging the Battery Step 3. To remove the tray, slide it to the left. [. . . ] 3 Press to discharge Discharging the Battery Step 3. To remove the tray, slide it to the left. To maximize the full power of your NiCad and NiMH batteries, we recommend discharging before recharging. [. . . ]