User manual SIMA SED-VA

[. . . ] DO NOT drop the unit, a jolt can cause permanent damage and is not covered by the warranty If the charger must be cleaned, be sure it is unplugged. Wipe the unit with a clean cloth, lightly dampened with mild detergent. Use a clean cloth, lightly dampened with rubbing alcohol to clean the metal contacts. If you have trouble installing your battery or if it is not listed on this chart, do not call the store where you purchased the SED-VA. Call Sima customer service at 800-345-7462 Battery Chart Brand Canon FUJIFILM Hitachi JVC JVC Kodak PENTAX Panasonic RCA RCA RICOH Sharp Sharp SONY SONY SONY TOSHIBA AA AAA Universal Battery Charger for use with Digital Cameras Model SED-VA Tray Base 1 Base Base Base 1 1 1 Base Base 2 1 Base 2 Base 2 2 1 AA/AAA AA/AAA Volt 6V 3. 7V 6V 6V 3. 6V 3. 6V 3. 7V 6V 6V 3. 6V 3. 6V 6V 3. 6V 6V 3. 6V 3. 6V 3. 6V 1. 2V 1. 2V Batt. type NiCad/NiMH Lithium Ion NiCad/NiMH NiCad/NiMH Lithium Ion Lithium Ion Lithium Ion NiCad/NiMH NiCad/NiMH Lithium Ion Lihium Ion NiCad/NiMH Lithium Ion NiCad/NiMH Lithium Ion Lithium Ion Lithium Ion NiCad/NiMH NiCad/NiMH Model Number BP-E77/711/714/718/722/729 NP-40/60/80/100/120 VM-BP82/82A/83/84/84A BN-V11U/12U/14U/140U/22U/50U/60U BN-V20U/25U BN-V712/714U KLIC-3000/5000 D-Li2/Li7 PV-BP15/17/18/ VW-VBS1E/S2E BB-45/75L/060/120/FB120/1260 BB-75 DB-20/30/40 BT-80 BT-L1/2/11/12 NP-55/66/67/68/77/78/98 NP-FC10/11 NP-F10/20/30/FS11/21/3 NP-100/ PDR-BT1/2/2A/3 Minolta, Olympus, Nikon and others. [. . . ] Consult your owner's manual. Works with these digital cameras: Sony Kodak Fuji Canon Sharp Pentax Minolta Olympus & more!www. simacorp. com 800-345-7462 Trouble Shooting Problem Possible Cause/Solution No Indicator Confirm the AC or cigarette adapter is firmly Lights with connected at both ends. Confirm that wall outlet is battery mounted working. Check fuse in car cord (un-screw tip of cigarette lighter adapter). Battery mounted incorrectly; remove and re-mount battery. Hissing noise in Charging Mode Normal operation due to advanced switching circuitry. Warranty Statement Sima Products Corporation ("Company") warrants that if this product proves to be defective to the original purchaser in material or workmanship within 90 days from the date of original retail purchase, the company will, at the company's option, either repair or replace same without charge (but no cash refund will be made). To enforce this warranty, ship your unit, freight pre-paid, including reasonable proof of date and place of purchase and description of problem to: Includes 3 adapter trays to charge Lithium - ion, Ni-Cad and NIMH batteries. Also AA & AAA Includes AC & DC adapters ©2004 Sima Products Corporation 140 Pennsylvania Ave. Bldg #5 Oakmont, PA 15139 800-345-7462 Fax 412-828-9338 www. simacorp. com PN21700 Attn: Customer Service c/o Sima Products Corporation 140 Pennsylvania Ave. 1 below) If the battery is dead, it may take up to 30 min for the Charge indicator to light up. When charging is complete, the green Full Status indicator will turn on (fig. At this point, the battery can be removed for use. It is recommended that you leave the battery connected to the charger for another 30 minutes to ensure a full or "topped off" charge Charge Full Discharge Charge Full Discharge Charge Full Discharge SLIDE INSERT TO LOCK Base Unit and Trays MODEL : UDC UNIVERSAL DIGITAL CHARGER TWO CELL CHARGING To install the adapter trays Step 1. Place the adapter tray onto the base unit. For Hitachi 6 volt For Canon 6 volt + + - + + + - 1 TWO CELL CHARGING Step 2. Align the arrow on the tray to the INSERT dot on the base unit. INSERT TWO CELL CHARGING SLIDE TO LOCK + + + - + - + + + + + + + - + 2 3 + Fig. To remove the tray, slide it to the left. Fig. 3 Plate AA/AAA 1 2 3 4 5 Plate 2 Plate 1 Press to discharge Discharging the Battery To maximize the full power of your NiCad and NiMH batteries, we recommend discharging before recharging. To discharge, mount the battery on the tray and press the Discharge button. [. . . ] To discharge, mount the battery on the tray and press the Discharge button. The yellow Discharge Status indicator will turn on. When discharging is complete, the battery will automatically begin to recharge and the red Charge Status indicator will turn on (Fig. 1). Depending on the amount of charge left in the battery, this may take several hours. [. . . ]