User manual SIMA SVC-2

[. . . ] Do not blow direcly into the microphone. Remember to remove the battery if the microphone will not be used for an extended period of time. 90 Day Limited Warranty from Sima Products Corporation Sima Products Corp. ("Sima") warrants that if the accompanying product proves to be defective to the original purchaser in material or workmanship within 90 days from the original retail purchase, Sima will, at Sima's option, either repair or replace same without charge (but no cash refund will be made). [. . . ] What you must do to enforce Warranty You must deliver, mail or ship the product, together with both the original bill of sale and this limited Warranty statement as proof of warranty coverage to: Sima Products Corp. Attn: Customer Service 140 Pennsylvania Ave. #5 Oakmont, PA 15139 It is recommended that you call Sima Customer Service at 800-345-7462 to obtain a return authorization number. Limitation of Liability and Remedies Sima shall have no liability for any damages due to lost profits, loss of use or anticipated benefits, or other incidental, consequential, special or punitive damages arising from the use of, or the inability to use, this product, whether arising out of contract, negligence, tort or under any warranty, even if Sima has been advised of the possibility of such damages. Sima's liability for damages in no event shall exceed the amount paid for this product. Sima neither assumes nor authorizes anyone to assume for it any other liabilities. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Model SVC-2 Zoom Microphone for use with Camcorder (camcorder not included) Troubleshooting Tips SVC-2 does not work 1. Off (Remember to turn off before storing. ) 2. Zoom ­ a longer, narrower audio range. Operation Install battery according to the polarity markings in the battery compartment. Connect the screw-on end of the cable to the bottom of SVC-2. Slide mike holder on to camcorder and snap SVC-2 into holder. For best results, aim SVC-2 towards sound source. Connect the other end to the camcorder or audio board as desired 4. Set switch to Normal or Zoom as desired. [. . . ] Set switch to Normal or Zoom as desired. Turn off when finished. Battery Slot Bottom cover Battery Installation The SVC-2 requires 1 AA battery (not included). To install, unscrew the bottom cover and slide off. [. . . ]