User manual SIMPLETECH 61000-00009-005

[. . . ] Read additional information from the computer guide regarding specific instructions on using the socket, then proceed to Installing the Network Drivers. Installing the Network Drivers Proceed to the section below appropriate to your operating system. The card is keyed and will complete insertion only in the proper orientation. Windows 95 may respond with the New Hardware Found dialog box. [. . . ] The drivers are copied to the drive and directory listed in the "Install to" section of configuration dialog box. When the installation is complete, a completion dialog box appears. After reading the text, click on OK. 8. Proceed to Connecting the Card. Connecting the Card 1. Start Windows 3. x, Windows for Workgroups, or Windows 95. Using the adapter cable provided and a twisted-pair cable with a RJ45 connector, connect the card to the network. The card is keyed and will complete insertion only in the proper orientation. The computer will beep when it recognizes the card. For Windows 95, the PCMCIA icon appears on the right of the task bar. Log on to the network. Removing the Card Proceed to the section below appropriate to your operating system. Double-click with the normal-select mouse button on the PCMCIA icon located on the right of the task bar. The "PC Card Properties" window appears. Wait until you are prompted to remove the card, then proceed to Step 3. If your computer has an eject button on the PC Card socket, press the button to release the card. Then, pull the card from the socket; Or, If your computer does not have an eject button on the PC Card socket, carefully pull the card straight out from the socket. Windows 3. 1 and Novell, or Windows for Workgroups 1. If you computer has an eject button on the PCMCIA socket, press the button to release the card. Then, pull the card from the socket; Or, If your computer does not have an eject button on the PCMCIA socket, carefully pull the card straight out from the socket. [. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form, by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without expressed written consent of STI. Disclaimer Specifications subject to change without notice. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, STI reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of STI to notify any person of such revision. Trademarks Simple Technology is a registered trademark of Simple Technology, Inc. [. . . ]