User manual SIMRAD PI CHARGER QUICK REFERENCE GUIDE REV D

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SIMRAD PI CHARGER. We hope that this SIMRAD PI CHARGER user guide will be useful to you.

Lastmanuals help download the user guide SIMRAD PI CHARGER.


Mode d'emploi SIMRAD PI CHARGER
Download
Manual abstract: user guide SIMRAD PI CHARGERQUICK REFERENCE GUIDE REV D

Detailed instructions for use are in the User's Guide.

[. . . ] Quick reference guide Simrad PI Charger Purpose Daily operation Indicators The Simrad PI Charger is an intelligent battery charger for fast and secure charging of the PI sensors. The charger will automatically set up the correct charging current depending on the sensor type and the battery temperature. [. . . ] If the sensor can not be fast charged, the charger will not display the battery temperature, and the temperature LED will be dark. 3) Observe the charge times and temperature limitations: Fast charge: First approximately one hour for 70% battery capacity, then approximately three hours to reach 100% capacity. Once fully charged, a constant trickle charge will compensate for self discharging. Note that fast charging applies to PI sensors only!Normal charge: 16 hours for full battery capacity. This mode applies for charging outside specified temperature range, and for all PS sensors. Charging temperature: For best results, keep the ambient temperature between +10 and +25°C. Do not charge sensors in temperatures above +50°C or below 0°C! (A) = 12 to 32 Vdc connected (B) = "Fuel meter", the number of LEDs illuminated shows the current charging status. A complete charging cycle is indicated with all "full" battery. Charging is indicated as follows: Fast: Fast flash Normal: Slow flash Trickle: On, off every 4 second (C) = Battery temperature indicators during fast charging of PI sensors: A Green: Battery temperature between +5 and +40°C. Green and Blue: Battery B temperature between 0 and +5°C. Fast charge is disabled, normal charge is used. [. . . ] The PS sensors do not communicate with the charger. A constant charge current of 58 mA is then set up by the charger regardless of the battery temperature. Typical sensor (PI Depth) (A) = Negative charging / fastening lug (B) = Positive charging / fastening lug (C) = Communication link (D) = Location of sensor lamp (E) = Water switch sensor (F) = Water pressure sensor C B D B E F 164681 / Rev. D / June 2007 Simrad Kongsberg Maritime AS Strandpromenaden 50 P. O. Box 111 N-3191 Horten, Norway Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 www. simrad. com simrad. sales@simrad. com [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMRAD PI CHARGER

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMRAD PI CHARGER will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag