User manual SIMRAD TRANSDUCER MOUNTING PROCEDURE SCHEMA REV B

[. . . ] Improper use or maintenance may cause damage to the equipment and/or injury to personnel. The user must be familiar with the contents of the appropriate manuals before attempting to install, operate or work on the equipment. Kongsberg Maritime AS disclaims any responsibility for damage or injury caused by improper installation, use or maintenance of the equipment. Support information If you require maintenance or repair, contact your local dealer. [. . . ] If you need information about our other products, visit our web site. On the web site you will also find a list of our dealers and distributors. Kongsberg Maritime AS www. kongsberg. com Software download and installation Table of contents ABOUT THIS DOCUMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SOFTWARE DOWNLOAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SOFTWARE PROCEDURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 How to install the TRANSDUCER MOUNTING PROCEDURE software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 How to obtain the TRANSDUCER MOUNTING PROCEDURE license. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 How to upgrade the TRANSDUCER MOUNTING PROCEDURE software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 How to remove the TRANSDUCER MOUNTING PROCEDURE software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 346906/A 3 Simrad TRANSDUCER MOUNTING PROCEDURE 4 346906/A About this document About this document This document describes how to download and install the operational software for the Simrad TRANSDUCER MOUNTING PROCEDURE Catch monitoring system. The information in chapter Software installation is extracted from the Simrad TRANSDUCER MOUNTING PROCEDURE Reference manual and Simrad TRANSDUCER MOUNTING PROCEDURE Installation manual. Note The Simrad TRANSDUCER MOUNTING PROCEDURE software requires 32-bit Windows® XP® (Service Pack 3)or 32­bit Windows® 7® operating systems. For new installations, Windows 7 is recommended. 346906/A 5 Simrad TRANSDUCER MOUNTING PROCEDURE Software download The software for the Simrad TRANSDUCER MOUNTING PROCEDURE Catch monitoring system can be downloaded from the Simrad Dealer Club. Access to this website is restricted to authorized dealers. 1 2 3 4 5 Log in on Simrad Dealer Club. http://www. simrad. com Login Simrad Dealer Club Locate the folder with TRANSDUCER MOUNTING PROCEDURE software. If the installation program does not start automatically, use a file manager to access the CD or USB memory stick. Double-click on the Setup. exe file to start the installation. 4 5 Allow the installation program to run. Once the installation has been completed, double-click the program icon on the desktop to start the application. 346906/A 7 Simrad TRANSDUCER MOUNTING PROCEDURE 6 7 If you use Windows 7 operating system: a Observe that Windows 7 Firewall will open a dialog requesting information about the network. b Select Public, and click Allow access. Observe the start-up procedure in the Getting started chapter. This chapter is provided in the TRANSDUCER MOUNTING PROCEDURE Operator manual and TRANSDUCER MOUNTING PROCEDURE Reference manual. How to obtain the TRANSDUCER MOUNTING PROCEDURE license The TRANSDUCER MOUNTING PROCEDURE requires a valid license to operate. Without a license you will not be able to communicate with the TRANSDUCER MOUNTING PROCEDURE Receiver. Note If you replace your computer, or if you replace major components inside your computer, you will need a new license code. We strongly advice you to record the license code for safe keeping. [. . . ] You may for example write it down in the beginning of the reference manual. 1 2 Double-click the TRANSDUCER MOUNTING PROCEDURE icon on the desktop to start the application. Click the Setup icon under the Main menu to open the Setup sub-menu. 3 Click Installation to open the Installation sub-menu. On the sub-menu, click Software License to open the Software License dialog. 4 5 6 7 Write down the Hardware ID provided by the Software License dialog. [. . . ]