User manual SINGER 19-18

[. . . ] Stitches are connected by stitch points. A marked stitch point is indicated by a filled square, a selected stitch point is indicated by an outlined square. Delete selected stitch point (4) If you want to delete a single stitch point, select the stitch point and touch the delete icon. If more than one stitch point is selected, they will all be deleted when touching the delete icon. [. . . ] If several stitch points are selected, all stitch points will be duplicated and inserted after the marked stitch point. Use the long touch function to get a pop-up where you can enter the exact number of duplicates you want to insert. Stitch Creator 7. Mirroring side to side Insert a new stitch point (6) Touch this icon to insert one single stitch point. The two stitch points will create a new stitch. Mirroring side to side (7) The selected stitch point(s) will be mirrored side to side. Mirroring end to end Mirroring end to end (8) The selected stitch points will be mirrored end to end. Note: Only enabled if more than one stitch point is selected. Triple stitch (9) Touch the triple stitch icon and the selected stitch(es) will be tripled. Note: Only active if at least two stitch points are selected. 9. Triple stitch 6:3 Zoom (10) When using the zoom icons, the focus will be on the marked stitch point. The distance between the grid lines equals 1mm on the fabric. when scale is 100% or less, you can not pan sideways. 16 17 13 14 15 Position of the marked stitch point The number to the left above the wheel (16) shows the actual needle position from the center line for the marked stitch point. The number to the right above the wheel (17) shows the actual feeding length from the previous stitch point. 16 17 Stitch Creator Save options (18) You can save your newly created stitch to your Personal menu (18a) or to your Personal files (18b). 18a 18b 18 6:5 Important Stitch Creator information Stitch Creator can be used in either sewing mode or embroidery mode. A stitch created when embroidery mode is active will become an embroidery design when saved, and cannot be sewn as a stitch in sewing mode. To save a stitch If sewing mode is active, you can save your stitch both in personal menu (A) and personal files (B). If embroidery mode is active, your stitch will be loaded to embroidery edit, and can only be saved as a design (C). A stitch created in sewing mode can be loaded manually into embroidery edit. To re-load a stitch If sewing mode is active when closing Stitch Creator, your stitch will be loaded to sewing mode and is ready to be sewn. [. . . ] To re-load a stitch If sewing mode is active when closing Stitch Creator, your stitch will be loaded to sewing mode and is ready to be sewn. If selecting another stitch in sewing mode and then re-opening Stitch Creator, your stitch will remain unchanged. Every time Stitch Creator is closed, the stitch will be A B C loaded to sewing mode. [. . . ]