User manual SINGER EXCEL 2662

[. . . ] ENGLISH “IMPORTANT SAFETY INSTRUCTIONS” “When using an electrical appliance, basic safety precautions should always be followed, including the following. € “Read all instructions before using this sewing machine. €This sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. [. . . ] Hold onto the threads during the sewing of the first 3 or 4 stitches of the seam. Fasten each seam by back tacking at the beginning and end of the seam. Fold and press wrong sides together on pulled thread line or marked lines. Repeat, sewing in the same direction for each tuck. ( U s e retractable spool pin for second spool and thread machine as you normally would). Left thread in left needle, right thread in right needle. stitch Width: Set at twin needle marking. Stitch Length: 2 – 3 Tension: Increase slightly Foot: Standard Zigzag To mark pintucks in your fabric, either pull a thread to mark the fold or mark with chalk or marking pencil. Stitch guiding one of the needles along the marked or pulled line. Repeat, sewing in the same direction for each tuck. Press seam open and then fold in topsides together, with stitching line exactly on fold. ZIGZAG STITCH OVERCASTING This is one of the more frequent uses for the zigzag stitch in garment construction. Place material under the presser foot so that the needle pierces just short of the outside edge. Use a backing of stabilizer or interfacing for sheer materials to avoid puckering. for applique set machine to desired width and length. Position applique on garment and stitch along design lines using satin stitch to cover raw edges of applique. Using a marking pencil trace your design onto your fabric. Sew using a straight stitch (stippling) or zigzag (Embroidery & Monograms) following your design line. Using a hoop will give you better control as you work. 5 to 2mm Stitch Length: 1 - 2 Foot: Satin or Standard Zigzag Align the edge of the fabric with the edge of the lace, topsides together. Zigzag along the edge of the 2 layers of fabric, so that the needle swings off the right edge of the fabric when sewing. this is referred to a roll and whip stitch. [. . . ] Push up the bulb slightly and turn clockwise. Insert new bulb, push up and turn counterclockwise. Unscrew the bulb and firmly screw in a new bulb. Disconnect the machine from power supply before changing a bulb. [. . . ]