User manual SINGER FEATHERWEIGHT II 118

[. . . ] 17 Adding/removing laundry during a wash program . 18 Cancelling a program that has not yet started . 18 Cancelling a program that has started . 22 Cleaning the drain pump and lint trap . [. . . ] At the end of the program, the lock is automatically unlocked. To cancel the program lock ^ Hold the "START" button until the "Door Lock" indicator goes out. Exception: The program selector was moved and the "Anti-crease/End" indicator blinks in the program sequence display. ^ Turn the program selector back to the originally selected program. The "Anti-crease/End" indicator light goes out. ^ Press the "START" button until the "Door Lock" indicator goes out. 20 Locking the washer Child Safety Lock This safety lock can be activated to prevent a child from climbing inside the washer. When the child safety lock is activated, the drum door cannot be opened and a program cannot be started. To activate the safety lock Before activating the lock: ­ the drum door must be closed, ­ the program selector must be at "End". Turn on the washer using the "On/Off" button. Press the "Heavy Soil" button and hold the button pressed in during steps 3. Turn the program selector slowly in a clockwise motion to "COTTONS/ 140 °F". Remove any detergent deposits or foreign objects from the threads of the filter housing and filter unit before returning the lint trap. ^ Return the lint trap and tighten into place. , If the lint trap is not tightened securely, water will leak out when the machine is in use. After cleaning: ^ Run the "Fine rinse" program. This step is necessary to activate the ball valve. 24 Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the washer. Quick Guide 1. Load the laundry ^ Turn the program selector in either direction to the desired program. Check the "Program guide", to determine which program is most appropriate for the load being washed. Select the spin speed ^ Turn on the washer using the "On/Off" button. ^ Open the drum door using the "Door" button. Make sure clothes will not be caught by the door. Quick Guide 5. Start the program ^ Press "START". Activate the program lock (if necessary) ^ Hold the "START" button until the "Door Lock" indicator lights up. Unload the laundry ^ Open the drum door using the "Door" button ^ Remove the laundry. j = Detergent compartment for the main wash i = Only add detergent (1/4 of the total recommended amount of detergent) to this compartment if the "Heavy Soil" wash option is selected. [. . . ] Do not remove these filters except for cleaning. Tips for a hot water connection ­ The hot water temperature from the hot water valve must not exceed 140°F; the ideal temperature is 130°F. ­ If there is no water pressure at the hot water inlet, the unit automatically switches to cold water after several minutes. 41 Plumbing connection The washing machine can be connected to a potable water supply. A non-return valve is not required, unless required by building code. [. . . ]