User manual SKIL 0900

[. . . ] ) ME77 GB F D NL S DK N FIN E P I H CZ TR PL ORIGINAL INSTRUCTIONS. [. . . ] 18 PÒVODNÍM NÁVODEM K POUÎÍVÁNÍ . 19 OR<J<NAL <fiLETME TAL<MATI . 28 LV LT INSTRUKCIJÅM ORIINÅLVALODÅ. 30 www. skileurope. com SKIL Europe BV - Konijnenberg 60 4825 BD Breda - The Netherlands 03/08 2610398627 1 2 b c d a a b c d e 795 mm 625 mm 370 mm 160 mm 640 mm 100 e 3 E C D B A 2 4 5 3 6 7a 7b 8 4 9a 8x 6x38 mm 6x12 mm 4x 8x45 mm 8x16 mm 2x 8x45 mm 4x 8x 8x 4x 4x 4x 2x 8x16 mm M6 M8 M8 5 9b 16x 4x15 mm 2x 2x 8x30 mm 8x19, 5 mm M8 4x 6x 2x 4x 6 0 1-6 x 1-6 x 7 ! 8 @ # 9 GB 5 pull adjustable clamping jaw B with the other hand towards the workpiece and fixed clamping jaw E Workbench INTRODUCTION 0900 6 carefully tighten each clamping handle with less than · The Slide and Lock system works in an entirely different way from all other conventional clamping systems · Read this instruction manual carefully before use and save it for future reference 1 · Only use the parts and accessories supplied; damage due to the use of non-original parts and accessories will be excluded from the warranty · This workbench is not intended to be used for clamping electrical power tools one turn (mostly less than half a turn) - for releasing the workpiece simply turn each clamping handle back into the downward position !never try to fine-adjust the clamping jaws by turning the clamping handles counter-clockwise, because this always results in releasing the clamping jaws - repeat steps 1 through 6 for every new clamping procedure · Clamping blocks !ensure that the workpiece is securely clamped · Folding out the workbench @ · Collapsing the workbench # TECHNICAL SPECIFICATIONS 2 WORKBENCH PARTS 3 A B C D E Clamping handle Adjustable clamping jaw Support arm (max. [. . . ] 5 kg) Bloc de serrage Griffe de serrage fixe 10 [. . . ]