User manual SKIL 0950

[. . . ] ) ME77 GB F D NL S DK N FIN E P I H CZ TR PL ORIGINAL INSTRUCTIONS . [. . . ] 18 PÒVODNÍM NÁVODEM K POUÎÍVÁNÍ . 19 OR<J<NAL <fiLETME TAL<MATI . 29 LV LT INSTRUKCIJÅM ORIINÅLVALODÅ. 31 www. skileurope. com SKIL Europe BV - Konijnenberg 60 4825 BD Breda - The Netherlands 03/08 2610398631 1 2 b c d a b c d e 800 mm 660 mm 400 mm 160 mm 610 mm a e 3 E D C B F G A 2 4 5 6a 6b 7 3 8a 30º 4x 8x 6x43 mm 6x12 mm M6 4x 2x 6x38 mm 6x12 mm M6 12x 8x 8x45 mm 8x15 mm M8 4x 2x 4x 4x 4 8b 2x 2x 2x 4x 2x 4x 4x M8 8x19, 5 mm 4x 4x M8 2x 8x19, 5 mm 6x 8x25 mm 8x19, 5 mm M8 4x 8x65 mm 2x 5 9 4x! 1-6 x 1-6 x 6 0 ! 4x 180º 7 @ # 8 GB 4 hold the workpiece with one hand between the jaws Workbench INTRODUCTION 0950 · The Slide and Lock system works in an entirely different way from all other conventional clamping systems · Read this instruction manual carefully before use and save it for future reference 1 · Only use the parts and accessories supplied; damage due to the use of non-original parts and accessories will be excluded from the warranty · This workbench is not intended to be used for clamping electrical power tools · TECHNICAL SPECIFICATIONS 2 WORKBENCH PARTS 3 A B C D E F G Clamping handle Adjustable clamping jaw Support arm (max. 5 kg) In-between clamping block Fixed clamping jaw Worktop clamping block Unlocking lever · · · (ensure that the 4 in-between clamping blocks D are correctly aligned to the workpiece) 5 pull adjustable clamping jaw B with the other hand towards the workpiece and fixed clamping jaw E 6 carefully tighten each clamping handle with less than one turn (mostly less than half a turn) - for releasing the workpiece simply turn each clamping handle back into the downward position !never try to fine-adjust the clamping jaws by turning the clamping handles counter-clockwise, because this always results in releasing the clamping jaws - repeat steps 1 through 6 for every new clamping procedure In-between clamping blocks 0 - always use the in-between clamping blocks to prevent the aluminium from damage ! [. . . ] firmly tighten all screws and nuts · Operating instructions 9 1 turn both clamping handles A counter-clockwise as far as they will go (between 1 to 6 turns) 2 push adjustable clamping jaw B back as far as it will go 3 fold out both support arms C for optimal workpiece support · Le système de glissière et de verrouillage fonctionne tout à fait différemment des autres systèmes de serrage conventionnels · Lisez attentivement ce manuel d'instruction avant d'utiliser l'appareil et conservez-le pour pouvoir vous y référer ultérieurement 1 · Utilisez uniquement les pièces et accessoires fournis; les dommages résultant de l'utilisation de pièces et accessoires n'étant pas d'origine seront exclus de la garantie · Cet établi n'a pas été conçu pour être utilisé pour le serrage d'outils électriques SPECIFICATIONS TECHNIQUES 2 9 [. . . ]