User manual SKIL 1470

[. . . ] Distractions can cause you to lose control. 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. [. . . ] A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. [. . . ] ONLY): · Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the plug · If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left unattended USE · Changing accessories 5 !disconnect the plug - remove/mount the required accessory as illustrated - ensure that the openings of the accessory engange into the tabs of the tool head (any snap-in position possible) - mount the accessory with the depressed centre pointing downwards - loosen/fasten screw A with hex key B - check the tight seating of the accessory (incorrect or not securely fastened accessories can come loose during operation and create a hazard) · Mounting of sanding sheet 6 - knock the dust out of the VELCRO material on sanding pad C 2 before mounting the sanding sheet - mount VELCRO sanding sheet as illustrated !the dust suction requires the use of perforated sanding sheets !perforation in sanding sheet should correspond with perforation in sanding foot ! [. . . ]