User manual SKIL 2364

[. . . ] WARNING and instructions may result in electric shock, fire and/or serious injury. Read all safety warnings and instructions. The term "power tool" in all of the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety Keep work area clean and well lit. [. . . ] This is important to prevent serious damage to the battery cells. If liquid comes in contact with skin, wash quickly with soap and water. If the liquid contacts your eyes, flush them with water for a minimum of 10 minutes and seek medical attention. Place charger on flat non-flammable surfaces and away from flammable materials when re-charging battery pack. The charger and battery pack heat during charging. Carpeting and other heat insulating surfaces block proper air circulation which may cause overheating of the charger and battery pack. If smoke or melting of the case are observed unplug the charger immediately and do not use the battery pack or charger. Use of an attachment not recommended or sold by Skil may result in a risk of fire, electric shock or injury to persons. WARNING tool or charger, keep them away from metal objects. For example, to protect terminals from shorting DONOT place batteries in a tool box or pocket with nails, screws, keys, etc. WARNING semble the battery or remove any component projecting from the battery terminals. Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting. LITHIUM-ION BATTERIES If equipped with a lithium-ion battery, the battery must be collected, recycled or disposed of in an environmentally sound manner. "The EPA certified RBRC Battery Recycling Seal on the lithium-ion (Li-ion) battery indicates Robert Bosch Tool Corporation is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alterative to placing used Li-ion batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY for information on Li-ion battery recycling and disposal bans/restrictions in your area, or return your batteries to a Skil/Bosch/Dremel Service Center for recycling. Robert Bosch Tool Corporation's involvement in this program is part of our commitment to preserving our environment and conserving our natural resources. CAUTION completely discharged before attempting to remove battery from your tool. Remove the eight (8) housing screws with a flat blade screwdriver. Remove housing cover by lifting upward from front end of tool. Wrap heavy insulating tape around battery terminals or enclose in a sealable plastic bag to prevent possible shorting. Dispose of battery through your local waste removal authority or a Skil Service Center. [. . . ] Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. we recommend that all tool service be performed by a Skil Factory Service Center or Authorized Skil Service Station. SERVICE MEN: Disconnect tool and/or charger from power source before servicing. BATTERIES Be alert for battery packs that are nearing their end of life. [. . . ]