User manual SKIL 2510

[. . . ] Failure to follow all instructions listed below may In all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. [. . . ] The charger and battery pack heat during charging. Carpeting and other heat insulating surfaces block proper air circulation which may cause overheating of the charger and battery pack. If smoke or melting of the case are observed unplug the charger immediately and do not use the battery pack or charger. Use of an attachment not recommended or sold by Skil may result in a risk of fire, electric shock or injury to persons. WARNING tool or charger, keep them away from metal objects. For example, to protect terminals from shorting, DO NOT place batteries in a tool box or pocket with nails, screws, keys, etc. WARNING semble the battery or remove any component projecting from the battery terminals. Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting. LITHIUM-ION BATTERIES If equipped with a lithium-ion battery, the battery must be collected, recycled or disposed of in an environmentally sound manner. "The EPA certified RBRC Battery Recycling Seal on the lithium-ion (Li-ion) battery indicates Robert Bosch Tool Corporation is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alterative to placing used Li-ion batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY for information on Li-ion battery recycling and disposal bans/restrictions in your area, or return your batteries to a Skil/Bosch/Dremel Service Center for recycling. Robert Bosch Tool Corporation's involvement in this program is part of our commitment to preserving our environment and conserving our natural resources. IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Bits are available for driving screws as well as running bolts and nuts. FORWARD/REVERSING LEVER & TRIGGER LOCK After tool use, lock trigger in ! wARNING "OFF" position to help prevent accidental starts and accidental discharge. Your tool is equipped with a forward/ reversing lever and trigger lock located above the trigger (Fig. * FORWARD/REVERSE INDICATOR LIGHTS Your tool may be equipped with lights which indicate the rotation of the bit. For forward rotation, (with bit pointed away from you) move the lever to the far left and a green indicator light depicting a forward arrow will light up. For reverse rotation move the lever to the far right and the green indicator light depicting a reverse arrow will light up. [. . . ] If this procedure is not followed, the tool will have a tendency to torque or twist in your hands when the nut or bolt seats. If both hands are holding the drill, they cannot be cut by the hole saw. Hole saws are Ideal for use with lock installation kits for 2-1/8" deadbolts or locksets with 15/16" or 1" latch hole in wooden and composition doors. Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. [. . . ]