User manual SKIL 2712

[. . . ] c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Do not use any adapter plugs with earthed (grounded) power tools. [. . . ] A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 6 d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. [. . . ] actuate the gear selector while tool is running slowly HIGH POWER - high torque - for screwdriving and drilling large diameters - for tapping thread HIGH SPEED - lower torque - for drilling small diameters Battery level indicator G % Shows how much energy the battery has left Battery protection Switches off the tool automatically when 1) the load is too high 2) the battery temperature is not within the allowable operating temperature range of 0 to 45°C 3) the lithium-ion battery is nearly empty (to protect against deep discharge) - in either case the 3 LED-lights of battery level indicator G will flash rapidly !do not continue to press the on/off switch after the tool is switched off automatically; battery may be damaged Automatic spindle-lock - when switch A 2 is not pressed, the spindle is locked - allows you to use the tool as a screwdriver (even when the battery is empty) 8 · Holding and guiding the tool ^ !while working, always hold the tool at the greycoloured grip area(s) - keep ventilation slots H 2 uncovered - do not apply too much pressure on the tool; let the tool do the work for you CE DECLARATION OF CONFORMITY · We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 60 335, EN 60 745, EN 55 014, in accordance with the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC (until Dec. 29, 2009 on) · Technical file at: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL 09 SKIL Europe BV A. [. . . ]