User manual SKIL 2810

[. . . ] This vacuum is intended for Household use only. When using an electrical appliance, basic precautions should always be followed: WARNING including lead or lead compounds known to the state of California to cause Cancer and birth defects or other reproductive harm. Please read these instructions before using this vacuum due to the safety This vacuum is intended for Household use only. Close attention is necessary when used near children. [. . . ] Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting. NICKEL-CADMIUM BATTERIES If equipped with a nickel-cadmium battery, the battery must be collected, recycled or disposed of in an environmentally sound manner. "The EPA certified RBRC Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates Robert Bosch Tool Corporation is voluntarily participating in an Do not attempt to disasindustry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alterative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling and disposal bans/restrictions in your area, or return your batteries to a Skil/Bosch/Dremel Service Center for recycling. Robert Bosch Tool Corporation's involvement in this program is part of our commitment to preserving our environment and conserving our natural resources. IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Rotational speed, at no load Per minute Off position Selector settings Infinitely variable selector with off Arrow Alternating current Direct current Alternating or direct current Class II construction Earthing terminal Warning symbol Ni-Cad RBRC seal Zero speed, zero torque. Higher number means greater speed Speed is increasing from 0 setting Action in the direction of arrow Type or a characteristic of current Type or a characteristic of current Type or a characteristic of current Designates Double Insulated Construction tools. Grounding terminal Alerts user to warning messages Designates Ni-Cad battery recycling program This symbol designates that this tool is listed to Canadian Standards by Underwriters Laboratories. This symbol designates that this tool is listed by Underwriters Laboratories, and listed to Canadian Standards by Underwriters Laboratories. This symbol designates that this tool is listed by Underwriters Laboratories. This symbol designates that this tool is listed by the Canadian Standards Association. This symbol designates that this tool complies to NOM Mexican Standards. WARNING off position before making any assembly, adjustments or changing Disconnect battery pack from tool or place the switch in the locked or Such preventive safety measures reduce the risk of starting the tool accidentally. Tool Model number Voltage rating Battery pack Charger Voltage rating WARNING from tool or place the switch in the locked or off position before making any assembly, adjustments or changing accessories. To install, push desired accessory completely into dust canister (Fig. To remove, simply pull out of dust canister. Pull filter seal completely out of dust canister and empty dust canister (Fig. Slide filter out of filter seal and tap dust out of filter (Fig. [. . . ] When you begin the charging process of the battery pack, a steady green light could also mean the battery pack is too hot or too cold. The purpose of the light is to indicate that the battery pack is fast-charging. it does not indicate the exact point of full charge. The light will stop blinking in less time if the battery pack was not completely discharged. [. . . ]