User manual SKIL 3820

[. . . ] ) symbol listed BELOW and other safety precautions, may result in serious personal injury. cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. [. . . ] NOTE: Make sure the rotation arrow on the blade matches the clockwise rotation arrow on the lower guard. To avoid injury, do not use a blade larger or smaller than 12" diameter and 1" arbor. Press the arbor lock and tighten blade bolt 4 securely, but do not overtighten. Never use saw without cover plate securely in place. Lower guard will not Be sure the arbor lock is released so the blade turns freely. After installing a new blade, lower the blade into the table slot and check for any contact with the base or turn table structure. Carbide is very brittle and can be easily damaged. Use caution when you install, use or store the blades. Do not use a carbide-tipped blade that is bent or has bent teeth, or if the blade has cracks, is broken, or has missing/loose carbide tips. Do not operate a carbide-tipped blade faster than its recommended speed. Read, understand and follow all warnings and instructions provided with your carbide-tipped blades. Simply push the dust bag 1 completely onto the dust port 2 (Figure 5). Position dust bag so that it does not interfere with the tool during the cutting operation for all miter/bevel settings. Empty it frequently and after completion of sawing. Carefully remove dust bag from dust port. Empty dust bag in proper trash bin by unzipping the bag. zip the bag before installing on the dust port. Be extremely careful of dust disposed, materials in fine particle form may be explosive. Spontaneous combustion, may in time, result from mixture of oil or water with dust particles. the dust port 1 can also be attached to a standard 1-1/2" vacuum tube for dust collection. When sawing chemically pressure treated lumber, paint that may be lead based, or any other materials that may contain carcinogens, use special precautions. A suitable respirator must be worn by all personnel entering the work area. [. . . ] Only genuine Skil replacement brushes specially designed for your tool should be used. To avoid accidents always disconnect the tool from the power supply before cleaning or performing any maintenance. The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when cleaning tools with compressed air. [. . . ]