User manual SKIL 4003

[. . . ] ) ME77 GB F D NL S DK N FIN E P I H CZ TR PL ORIGINAL INSTRUCTIONS . 55 INSTRUCIUNI DE FOLOSIRE ORIGINALE . 40 OR<J<NAL <fiLETME TAL<MATI . 81 www. skileurope. com SKIL Europe BV - Konijnenberg 60 4825 BD Breda - The Netherlands 04/08 2610394187 1 4003 380 Watt 1, 6 kg EPTA 01/2003 3000 p/min 55mm 10 mm 4 mm 4170 400 Watt 1, 7 kg EPTA 01/2003 0-3000 p/min 65mm 10 mm 4 mm 2 B A C (4170) 3 D 4 2 5 6 1 2 3 4 3 7 8 1 2 3 4 4 9 ! 0 5 @ 2610388128 2610388130 2610388134 4170 % # 2610388130 2610388132 2610388134 ACCESSORIES 2610388124 2610388122 2610388126 2610388128 6 $ SKIL nr. 2610388138 GB Jig saw INTRODUCTION 4003/4170 This tool is intended for making cut-throughs and cutouts in wood, plastic, metal, ceramic plates and rubber, and is suitable for straight and curved cuts with mitre angles to 45 Read and save this instruction manual 3 TECHNICAL SPECIFICATIONS 1 TOOL ELEMENTS 2 A B C D Switch for on/off Button for switch locking Wheel for adjusting sawing speed (4170) Ventilation slots SAFETY GENERAL SAFETY INSTRUCTIONS WARNING! [. . . ] g) Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. SAFETY INSTRUCTIONS FOR JIG SAWS Always keep the cord away from moving parts of the tool; direct the cord to the rear, away from the tool If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the plug Never use the tool when cord is damaged; have it replaced by a qualified person Do not work materials containing asbestos (asbestos is considered carcinogenic) Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction with additives for wood conditioning; wear a dust mask and work with a dust extraction device when connectable Follow the dust-related national requirements for the materials you want to work with Do not use a saw blade which is cracked, deformed or dull Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than by hand) Keep hands away from the saw blade while the tool is in use Remove all obstacles on top of as well as underneath the cutting path before you start cutting Always disconnect plug from power source before making any adjustment or changing any accessory Wear protective goggles when working with materials which produce chips Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them before you start working Check the functioning of the tool before each use and, in case of a defect, have it repaired immediately by a qualified person; never open the tool yourself Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools with a rating of 230V or 240V can also be connected to a 220V supply) When used outdoors, connect the tool via a fault current (FI) circuit breaker with a triggering current of 30 mA maximum, and only use an extension cord which is intended for outdoor use and equipped with a splashproof coupling-socket The noise level when working can exceed 85 dB(A); wear ear protection When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete standstill SKIL can assure flawless functioning of the tool only when original accessories are used Use completely unrolled and safe extension cords with a capacity of 16 Amps (U. K. 13 Amps) In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug This tool should not be used by people under the age of 16 years WHEN CONNECTING NEW 3-PIN PLUG (U. K. ONLY): Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left unattended USE On/off 4 Switch locking for continuous use 5 Changing saw blades 6 !insert blade to full depth with teeth facing forward 7 Sawing at 15/30/45 8 Adjusting sawing speed to material used 9 (4170) !if the tool does not run with wheel C in position 1, select a higher sawing speed and lower the sawing speed while the tool runs Dust suction 0 !do not use vacuum cleaner when cutting metal Operating the tool - before switching on the tool, ensure that front end of footplate rests flat on the workpiece - hold tool firmly with both hands, so you will have full control of the tool at all times 8 !while working, always hold the tool at the greycoloured grip area(s) !- ensure that complete surface of footplate rests firmly on the workpiece !ensure that the blade has come to a complete standstill, before you lift the tool from the workpiece - keep ventilation slots D 2 uncovered ENVIRONMENT Do not dispose of electric tools, accessories and packaging together with household waste material (only for EU countries) - in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility - symbol % will remind you of this when the need for disposing occurs APPLICATION ADVICE Use the appropriate saw blades @ !NOISE/VIBRATION Measured in accordance with EN 60 745 the sound pressure level of this tool is 85 (4003)/87 (4170) dB(A) and the sound power level 96 (4003)/98 (4170) dB(A) (standard deviation: 3 dB), and the vibration m/s2 (hand-arm method). Technical file at: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. F CE DCLARATION DE CONFORMIT Nous dclarons sous notre propre responsabilit que ce produit est en conformit avec les normes ou documents normaliss suivants: EN 60 745, EN 55 014, conforme aux rglementations 2006/95/CE, 2004/108/CE, 98/37/CE (jusqu'au 28. 12. 2009), 2006/42/CE ( partir du 29. 12. 2009). BRUIT/VIBRATION Mesur selon EN 60 745 le niveau de la pression sonore de cet outil est 85 (4003)/87 (4170) dB(A) et le niveau de la puissance sonore 96 (4003)/98 (4170) dB(A) (dviation standard: 3 dB), et la vibration m/s2 (mthode main-bras). Dossier technique auprs de: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. D CE KONFORMITTSERKLRUNG Wir erklren in alleiniger Verantwortung, da dieses Produkt mit den folgenden Normen oder normativen Dokumenten bereinstimmt: EN 60 745, EN 55 014, gem den Bestimmungen der Richtlinien 2006/95/EG, 2004/108/EG, 98/37/EG (bis 28. 12. 2009), 2006/42/EG (ab 29. 12. 2009). GERUSCH/VIBRATION Gemessen gem EN 60 745 betrgt der Schalldruckpegel dieses Gertes 85 (4003)/87 (4170) dB(A) und der Schalleistungspegel 96 (4003)/98 (4170) dB(A) (Standard- abweichung: 3 dB), und die Vibration m/s2 (Hand-Arm Methode). Technische Unterlagen bei: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. NL CE CONFORMITEITSVERKLARING Wij verklaren, dat dit product voldoet aan de volgende normen of normatieve documenten: EN 60 745, EN 55 014, overeenkomstig de bepalingen van de richtlijnen 2006/95/EG, 2004/108/EG, 98/37/EG (tot 28-12-2009), 2006/42/EG (vanaf 29-12-2009). GELUID/VIBRATIE Gemeten volgens EN 60 745 bedraagt het geluidsdrukniveau van deze machine 85 (4003)/87 (4170) dB(A) en het geluidsvermogen-niveau 96 (4003)/98 (4170) dB(A) (standaard deviatie: 3 dB), en de vibratie m/s2 (hand-arm methode). Technisch dossier bij: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. S CE KONFORMITETSFRKLARING Vi intygar och ansvarar fr, att denna produkt verensstmmer med fljande norm och dokument: EN 60 745, EN 55 014, enl. bestmmelser och riktlinjema 2006/95/EG, 2004/108/EG, 98/37/EG (till 28. 12. 2009), 2006/42/EG (from 29. 12. 2009). [. . . ] : SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. RU UA GR CE YMBATOT : EN 60 745, EN 55 014, 2006/95/EK, 2004/108/EK, 98/37/EK ( 28. 12. 2009), 2006/42/EK ( 29. 12. 2009). Y / Y EN 60 745 85 (4003)/87 (4170) dB(A) o 96 (4003)/98 (4170) dB(A) ( : 3 dB), m/s2 ( / ). : SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. 08 SKIL Europe BV A. Kloot 85 RO DECLARAIE DE CONFORMITATE CE Declarm pe proprie rspundere c acest product este conform cu urmtoarele standarde sau documente standardizate: EN 60 745, EN 55 014, n conformitate cu regulile 2006/95/CE, 2004/108/CE, 98/37/CE (pn la 28. 12. 2009), 2006/42/CE (ncepnd cu 29. 12. 2009). [. . . ]