User manual SKIL 6004

[. . . ] 17 oldal 19 strana 20 sayfa 21 strona 22 23 24 pagina 26 YKA3A POKYNY 27 strana 28 www. skileurope. com SKIL Europe BV - Konijnenberg 60 4825 BD Breda - The Netherlands 11/03 2610393186 1 6004 600W 1, 8 kg ACCESSORIES + Magnetic PHILLIPS Nr 1, 2 POZIDRIV Nr 1, 2 M4, M5 2610389145 2610073400 2610389146 + (HSS) ø 5, 6, 8 mm + ø 5, 6, 8 mm ø 5, 6, 8 mm In Deutschland nicht lieferbar 2 D C B A E 2 3 4 5 6 3 7 8 1 32 9 4 0 ! PHILLIPS POZIDRIV SLOTTED 5 @ # $ TEN NIS % 6 GB Hammer drill INTRODUCTION 6004 This tool is intended for hammer drilling in brick, concrete and stone as well as for drilling in wood, metal, ceramic and plastic; tools with electronic speed control and left/right rotation are also suitable for screwdriving and thread cutting Be aware of the forces that occur as a result of jamming (especially when drilling metals); always use auxiliary handle E 2 and take a secure stance Always disconnect plug from power source before making any adjustment or changing any accessory WHEN CONNECTING NEW 3-PIN PLUG (U. K. ONLY): Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left unattended TECHNICAL SPECIFICATIONS 1 OPERATING CONTROLS 2 A B C D E Switch for on/off and speed control Button for switch locking Switch for changing direction of rotation Switch for selecting drilling function Auxiliary handle USE SAFETY Read and save this instruction manual (pay special attention to the safety instructions at the back) Wear ear protectors with hammer drills (exposure to noise can cause hearing loss) Use auxiliary handles supplied with the tool (loss of control can cause personal injury) Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them before you start working Always keep the cord away from moving parts of the tool When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete standstill Use completely unrolled and safe extension cords with a capacity of 16 Amps (UK 13 Amps) In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug SKIL can assure flawless functioning of the tool only when original accessories are used Use only accessories with an allowable speed matching at least the highest no-load speed of the tool This tool should not be used by people under the age of 16 years Be careful not to drill or drive into areas where electrical wires may be contacted; always use auxiliary handle E 2 If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the plug Never use tool when cord is damaged; have it replaced by a qualified person Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools with a rating of 230V or 240V can also be connected to a 220V supply) If the drill bit becomes unexpectedly jammed (causing a sudden, dangerous reaction), immediately switch off the tool On/Off 3 Switch locking for continuous use 4 Speed control for smooth starting 5 Changing direction of rotation 6 - when not properly set in left/right position, switch A cannot be activated !change direction of rotation only when tool is at a complete standstill Normal drilling/screwdriving versus hammer drilling 7 ! [. . . ] NOISE/VIBRATION Measured in accordance with EN 50 144 the sound pressure level of this tool is 100 dB(A), the sound power level 113 dB(A) and the vibration 23. 5 m/s2 (hand-arm method). CE DÉCLARATION DE CONFORMITÉ Nous déclarons sous notre propre responsabilité que ce produit est en conformité avec les normes ou documents normalisés suivants: EN 50 144, EN 55 014, conforme aux réglementations 73/23/EEC, 89/336/EEC, 98/37/EEC. BRUIT/VIBRATION Mesuré selon EN 50 144 le niveau de la pression sonore de cet outil est 100 dB(A), le niveau de la puissance sonore 113 dB(A) et la vibration 23, 5 m/s2 (méthode main-bras). CE KONFORMITÄTSERKLÄRUNG Wir erklären in alleiniger Verantwortung, daß dieses Produkt mit den folgenden Normen oder normativen Dokumenten übereinstimmt: EN 50 144, EN 55 014, gemäß den Bestimmungen der Richtlinien 73/23/EWG, 89/336/EWG, 98/37/EWG. GERÄUSCH/VIBRATION Gemessen gemäß EN 50 144 beträgt der Schalldruckpegel dieses Gerätes 100 dB(A), der Schalleistungspegel 113 dB(A) und die Vibration 23, 5 m/s2 (Hand-Arm Methode). CE CONFORMITEITSVERKLARING Wij verklaren, dat dit product voldoet aan de volgende normen of normatieve documenten: EN 50 144, EN 55 014, overeenkomstig de bepalingen van de richtlijnen 73/23/EEG, 89/336/EEG, 98/37/EEG. GELUID/VIBRATIE Gemeten volgens EN 50 144 bedraagt het geluidsdrukniveau van deze machine 100 dB(A), het geluidsvermogenniveau 113 dB(A) en de vibratie 23, 5 m/s2 (hand-arm methode). CE KONFORMITETSFÖRKLARING Vi intygar och ansvarar för, att denna produkt överensstämmer med följande norm och dokument: EN 50 144, EN 55 014, enl. bestämmelser och riktlinjema 73/23/EWG, 89/336/EWG, 98/37/EWG. LJUD/VIBRATION Ljudtrycksnivån som uppmätts enligt EN 50 144 är på denna maskin 100 dB(A), ljudeffektnivån 113 dB(A) och vibration 23, 5 m/s2 (hand-arm metod). CE KONFORMITETSERKLÆRING Vi erklærer under almindeligt ansvar, at dette produkt er i overensstemmelse med følgende normer eller normative dokumenter: EN 50 144, EN 55 014, i henhold til bestemmelserne i direktiverne 73/23/EØF, 89/336/EØF, 98/37/EØF. STØJ/VIBRATION Måles efter EN 50 144 er lydtrykniveau af dette værktøj 100 dB(A), lydeffektniveau 113 dB(A) og vibrationsniveauet 23, 5 m/s2 (hånd-arm metoden). CE SAMSVARSERKLÆRING Vi erklærer at det er under vårt ansvar at dette produkt er i samsvar med følgende standarder eller standard- dokumenter: EN 50 144, EN 55 014, i samsvar med reguleringer 73/23/EWG, 89/336/EWG, 98/37/EWG. STØY/VIBRASJON Målt ifølge EN 50 144 er lydtrykknivået av dette verktøyet 100 dB(A), lydstyrkenivået 113 dB(A) og vibrasjonsnivået 23, 5 m/s2 (hånd-arm metode). CE STRVZUJÍCÍ PROHLÅENÍ Potvrzujeme na odpovdnost, e tento v¥robek odpovídå nåsledujícím normåm nebo normativním podkladüm: EN 50 144, EN 55 014, podle ustanovení smrnic 73/23/EWG, 89/336/EWG, 98/37/EWG. HLUÇNOSTI/VIBRACÍ M®eno podle EN 50 144 çiní tlak hlukové vlny tohoto p®ístroje 100 dB(A), dávka hluçnosti 113 dB(A) a vibrací 23, 5 m/s2 (metoda ruka-pae). [. . . ] ZGOMOT/VIBRAØII Måsurat în conformitate cu EN 50 144 nivelul de presiune a sunetului generat de acest instrument este de 100 dB(A), nivelul de putere a sunetului 113 dB(A) iar nivelul vibraøiilor 23, 5 m/s2 (metoda mînå - braø). CE KPA A COTETCTBE , : EN 50 144, EN 55 014, 73/23/EEC, 89/336/EEC, 98/37/EEC. /PA EN 50 144 100 dB(A), 113 dB(A), 23, 5 m/s2 ( -). [. . . ]