User manual SKIL 6545

[. . . ] ) GB F D NL S DK N FIN E P I H CZ TR INSTRUCTIONS. 40 PL RU UA GR RO BG SK HR SRB SLO EST LV LT INSTRUKCJA . 77 www. skileurope. com SKIL Europe BV - Konijnenberg 60 4825 BD Breda - The Netherlands 03/08 ME77 2610398253 1 6545 450 EPTA 01/2003 Watt 1, 3 kg 0-3000/min 10 mm 10 mm 20 mm RUBBER 2 E 3 D C A B 2 4 5 6 7 C VARIABLE SPEED MIN MAX 3 8 A 9 0 4 GB Rotary drill INTRODUCTION 6545 This tool is intended for drilling in wood, metal, ceramic and plastic; tools with electronic speed control and left/ right rotation are also suitable for screwdriving and thread cutting Read and save this instruction manual 3 TECHNICAL SPECIFICATIONS 1 TOOL ELEMENTS 2 A B C D E Switch for on/off and speed control Button for switch locking Wheel for maximum speed control Switch for changing direction of rotation Ventilation slots SAFETY GENERAL SAFETY INSTRUCTIONS WARNING!Read all safety warnings and all instructions. [. . . ] Use of the power tool for operations different from those intended could result in a hazardous situation. 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. SAFETY INSTRUCTIONS FOR DRILLS Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them before you start working Always keep the cord away from moving parts of the tool Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than by hand) When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete standstill Use completely unrolled and safe extension cords with a capacity of 16 Amps (U. K. 13 Amps) In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug SKIL can assure flawless functioning of the tool only when the correct accessories are used which can be obtained from your SKIL dealer Use only accessories with an allowable speed matching at least the highest no-load speed of the tool This tool should not be used by people under the age of 16 years Hold the power tool only by the insulated gripping surfaces when performing an operation where the accessory may contact hidden wiring or its own power cord (contact with a "live" wire will also make exposed metal parts of the power tool "live" and shock the operator) Use suitable detectors to find hidden utility lines or call the local utility company for assistance (contact with electric lines can lead to fire or electrical shock; damaging a gas line can result in an explosion; penetrating a water pipe will cause property damage or an electrical shock) Do not work materials containing asbestos (asbestos is considered carcinogenic) Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction with additives for wood conditioning; wear a dust mask and work with a dust extraction device when connectable Follow the dust-related national requirements for the materials you want to work with If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the plug Never use tool when cord is damaged; have it replaced by a qualified person Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools with a rating of 230V or 240V can also be connected to a 220V supply) If the drill bit becomes unexpectedly jammed (causing a sudden, dangerous reaction), immediately switch off the tool Always disconnect plug from power source before making any adjustment or changing any accessory WHEN CONNECTING NEW 3-PIN PLUG (U. K. ONLY): Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left unattended USE On/off 4 Switch locking for continuous use 5 Speed control for smooth starting 6 Maximum speed control 7 With wheel C the maximum speed can be adjusted from low to high - switch on the tool - lock the switch - turn wheel C to select maximum speed Changing direction of rotation 8 - when not properly set in left/right position, switch A cannot be activated !change direction of rotation only when tool is at a complete standstill 6 Changing bits 9 - insert the bit as deep as possible in the chuck !do not use bits with a damaged shank F Perceuse INTRODUCTION 6545 APPLICATION ADVICE When drilling ferrous metals - pre-drill a smaller hole, when a large hole is required - lubricate drill bit occasionally with oil When turning in a screw at/near the cross cut end or an edge of wood, pre-drill a hole in order to avoid cracking of the wood Vibration level The vibration emission level stated at the back of this instruction manual (indicated by an asterisk) has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned - using the tool for different applications, or with different or poorly maintainted accessories, may significantly increase the exposure level - the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level !protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns Cet outil est conu pour le perage dans le bois, le mtal, la cramique et les matires plastiques; les outils avec rglage lectronique de la vitesse et rotation droite/ gauche sont galement appropis pour le vissage et le filetage Lisez et conservez ce manuel d'instructions 3 SPECIFICATIONS TECHNIQUES 1 ELEMENTS DE L'OUTIL 2 A B C D E Interrupteur de marche/arrt et rglage de vitesse Bouton de blocage de l'interrupteur Molette de rglage de la vitesse maximum Commutateur pour inverser le sens de rotation Fentes de ventilation SECURITE INSTRUCTIONS GENERALES DE SECURITE ATTENTION!Lisez tous les avertissements de scurit et toutes les instructions. Ne pas suivre les avertissements et instructions peut entraner un choc lectrique, un incendie et/ou de graves blessures sur les personnes. Conservez tous les avertissements et toutes les instructions pour pouvoir s'y reporter ultrieurement. La notion d'"outil lectroportatif" dans les avertissements se rapporte des outils lectriques raccords au secteur (avec cble de raccordement). 1) SECURITE DE LA ZONE DE TRAVAIL a) Maintenez l'endroit de travail propre et bien clair. Un lieu de travail en dsordre ou mal clair augmente le risque d'accidents. NOISE/VIBRATION Measured in accordance with EN 60 745 the sound pressure level of this tool is 82 dB(A) and the sound power level 93 dB(A) (standard deviation: 3 dB), and the vibration 5. 4 m/s2 (hand-arm method; uncertainty K = 1. 5 m/s2). Technical file at: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. F CE DCLARATION DE CONFORMIT Nous dclarons sous notre propre responsabilit que ce produit est en conformit avec les normes ou documents normaliss suivants: EN 60 745, EN 55 014, conforme aux rglementations 2006/95/CE, 2004/108/CE, 98/37/CE (jusqu'au 28. 12. 2009), 2006/42/CE ( partir du 29. 12. 2009). BRUIT/VIBRATION Mesur selon EN 60 745 le niveau de la pression sonore de cet outil est 82 dB(A) et le niveau de la puissance sonore 93 dB(A) (dviation standard: 3 dB), et la vibration 5, 4 m/s2 (mthode main-bras; incertitude K = 1, 5 m/s2). Dossier technique auprs de: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. D CE KONFORMITTSERKLRUNG Wir erklren in alleiniger Verantwortung, da dieses Produkt mit den folgenden Normen oder normativen Dokumenten bereinstimmt: EN 60 745, EN 55 014, gem den Bestimmungen der Richtlinien 2006/95/EG, 2004/108/EG, 98/37/EG (bis 28. 12. 2009), 2006/42/EG (ab 29. 12. 2009). GERUSCH/VIBRATION Gemessen gem EN 60 745 betrgt der Schalldruckpegel dieses Gertes 82 dB(A) und der Schalleistungspegel 93 dB(A) (Standard- abweichung: 3 dB), und die Vibration 5, 4 m/s2 (Hand-Arm Methode; unsicherheit K = 1, 5 m/s2). Technische Unterlagen bei: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. NL CE CONFORMITEITSVERKLARING Wij verklaren, dat dit product voldoet aan de volgende normen of normatieve documenten: EN 60 745, EN 55 014, overeenkomstig de bepalingen van de richtlijnen 2006/95/EG, 2004/108/EG, 98/37/EG (tot 28-12-2009), 2006/42/EG (vanaf 29-12-2009). GELUID/VIBRATIE Gemeten volgens EN 60 745 bedraagt het geluidsdrukniveau van deze machine 82 dB(A) en het geluidsvermogen-niveau 93 dB(A) (standaard deviatie: 3 dB), en de vibratie 5, 4 m/s2 (hand-arm methode; onzekerheid K = 1, 5 m/s2). [. . . ] Y / Y EN 60 745 82 dB(A) o 93 dB(A) ( : 3 dB), 5, 4 m/s2 ( / - K = 1, 5 m/s2). : SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. 08 SKIL Europe BV A. Kloot 82 RO DECLARAIE DE CONFORMITATE CE Declarm pe proprie rspundere c acest product este conform cu urmtoarele standarde sau documente standardizate: EN 60 745, EN 55 014, n conformitate cu regulile 2006/95/CE, 2004/108/CE, 98/37/CE (pn la 28. 12. 2009), 2006/42/CE (ncepnd cu 29. 12. 2009). ZGOMOT/VIBRAII Msurat n conformitate cu EN 60 745 nivelul de presiune a sunetului generat de acest instrument este de 82 dB(A) iar nivelul de putere a sunetului 93 dB(A) (abaterea standard: 3 dB), iar nivelul vibraiilor 5, 4 m/s2 (metoda mn - bra; incertitudine K = 1, 5 m/s2). [. . . ]