User manual SKODA RADIO NAVIGATION SYSTEM AMUNDSEN FOR FABIA

[. . . ] SIMPLY CLE VER SkodaAuto RADIO NAVIGATION SYSTEM AMUNDSEN Introduction You have chosen a Skoda vehicle, which is fitted with a dynamic radio navigation system Amundsen (hereafter called the radio navigation system) - we thank you for your confidence in us. We recommend that you read these operating instructions carefully so that you can quickly become familiar with your radio navigation system. Should you have any questions or problems with your radio navigation system, please do not hesitate to contact your authorised Skoda Service Partner or importer. National legal provisions, which deviate from the information contained in these operating instructions, take precedence over the information contained in the operating instructions. [. . . ] 10 Menu of the audio source via the multimedia socket MDI · · The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3 data with variable bit rates. The indicated playing time data with variable bit rates is not reliable. Input AUX ­ Activate the AUX socket in the menu Setup Media by pressing the function key AUX . ­ The input for an external audio source is located on the unit. ­ External audio sources, which are connected to the AUX socket, cannot be operated via the radio. Note For the correct display of the specific characters in Czech in ID3 day (name of the artist, the album and the track), the text must correspond to the standard ID3°V2 and the UTF coding. Input MDI - Multimedia socket ­ The input MDI is located under the armrest of the front seats or in the storage compartment on the front passenger side. Range selector key MEDIA ­ Audio data in MP3, WMA, OGG Vorbis and AAC format from the external data stickers, connected to the multimedia socket, can be played via the radio. ­ External audio sources, which are connected to the MDI socket, can be operated via the radio. You can select another audio source on the radio at any time. As long as the external audio source is not switched off, it remains always active in the background. Please refer to the Owner's manual of the respective manufacturer for the operation of the external audio source. Use the standard jack plug 3. 5 mm for the AUX socket. If the external audio source does not have this jack plug, you must use an adapter. iPod If an iPod is connected to the MDI socket, a menu is opened in which you can select the folders of the iPods (playlists, artists, albums, songs etc. ). Adjust the play function volume of the external audio source The play function volume of the external audio source can be changed via the volume control on the radio. Depending on the connected audio source, the output volume on the external audio source can be changed. You can also change the input sensitivity of the external audio source, in order for the play function volume of the external audio source to adapt to other audio sources or to avoid distortions of the play function volume. Adapter A special adapter is required to connect audio sources via the input MDI. You can purchase an adapter for connecting the USB devices, the devices with Mini USB output or an iPod, from the range of the Skoda original accessories. Conditions for proper connection The version of the file allocation table FAT (File Allocation Table) of the connected device must be FAT16 (< 2 GB) or FAT32 (> 2 GB). 21 · · · · In order to replay from a unit with a hard disk (HDD) which includes a large data volume, it can lead to a time delay when reading in the overview of the music data. In order to replay from a unit, which includes a complicated folder structure, it can lead to a time delay when reading in the overview of the music data. The folder structure in the connected unit must not exceed a depth of 8 levels. One folder must not contain more than 1°000° data. A USB extension cable or USB distributor (HUB) must not be used to connect the unit. · · · · WARNING On no account place an external audio source on the dash panel. You could make sudden manoeuvres in the passenger compartment and injure the occupants. [. . . ] ­ If once again the function key Extras and Resume call is pressed, it is possible to continue the call. ­ If you press the function key , during a phone conversation, the connection to the current call number will be terminated and the unit will change to the main menu PHONE. 33 Please note that in a DTMF key tone sequence the character "+" must not appear, as it interrupts the playing of a DTMF key tone. Carrying out an additional phone conversation ­ Press the range selector key PHONE and select a telephone number during a conversation. ­ Select a new call number or select a stored call number. ­ If you have established a new telephone call, you can "change" between both calls. [. . . ]