User manual SKYMASTER UNIVERSAL-FERNBEDIENUNG 7 IN1

[. . . ] Since our products undergo permanent strict qualtiy checks we are confident you will be delighted by the long lasting trouble-free performance. Given a thorough and careful reading through this manual you will recognize the many special features this universal remote control offers and appreciate its comfortable and easy handling. [. . . ] Example: To pre-programme SKYMASTER XL 55 hold both keys [SET] and [SAT] followed by the digits º · ⷠFor DVD player Supervision 1000 press keys [SET] and [DVD] followed by the digits ² ² ´. In case several code numbers apply for your brand scan through to find the valid one. Example: To control satellite receiver press [SAT] followed by new digits, respectively for DVD player first press [DVD] and so on. HOW TO TRACE CODE NUMBERS BY QUICK SEARCH In case you can't find your brand at code number list, please try with quick search. 1) Set the device that you want to control at POWER ON or VCR at POWER ON with tape loaded. 2) Press and hold both, [SET] and aquivalent device key, until LED light shows up, then release both keys. 4) If your device has action then check other keys such as [CH +/-] or [VOL +/-], if negative continue pressing [POWER] to search another code page. 5) While during paging a code was missed out you may press [SET] to change the Forward / Backward direction of searching. 6) IF any key is not pressed within 30 seconds at search mode then unit will quit and return to STAND-BY mode. hOW TO GET THE CODE NUMBER TRACED BY QUICK SEARCH. Check the code number that has called up to the keypad by pressing [SET] together with (one after the other) the first three keypad digits: For example, if is blinking 8 times, 1st digit of code number is [8], · Blinking twice means 2nd digit is [2], blinking twice means 3rd digit is [2], therefore, this code number is [822]. Power source: 2 x UM3 "AAA size" (Batteries located behind cover slide. [. . . ] Should you prefer to directly send the device to us, make sure consignments are prepaid, otherwise they won't be accepted. For repair and/or replacement of parts please allow an average of 48 hours, not included delivery time. [. . . ]