Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SKYPE EC14. We hope that this SKYPE EC14 user guide will be useful to you.
Lastmanuals help download the user guide SKYPE EC14.
Detailed instructions for use are in the User's Guide.
[. . . ] Place the lid on the scale, place the tank on the lid then attach the strap around the tank for transport purposes.
IMPORTANT
1. Read operating instructions completely prior to using this equipment. Recover the refrigerant trapped in the service hoses after each charging operation.
ABOUT YOUR UNIT
1. The SKYE EC14x provides complete capability for the vacuum and charging functions on AC systems containing CFC, HCFC and HFC refrigerants. [. . . ] Press and hold the ZERO button for 2 seconds then press the SET button. The scale will beep and the red LED in the corner of the button will illuminate. and FAST buttons to set the charge amount. Use the " button to fine tune the charge amount. Press the SET button again to enter the charge amount. The scale will beep, the red LED will go out and the LCD display will read 0 lbs 00 oz. The scale solenoid will open and allow refrigerant flow. NOTE: The charging process may be interrupted at any time to change refrigerant supply tanks or perform an AC system test by pressing the GO/Hold button. To restart the charge, press GO/HOLD again. If the AC system is OFF, you may open the RED hand valve also.
7
9. When the programmed weight has been dispensed the scale solenoid will close and the scale will beep. Close the gauge set valve(s) and turn the scale OFF. IMPORTANT: If an AC system problem that requires refrigerant recovery occurs, connect your recovery/recycling system to the auxiliary center service port on the charging station gauge set. Recover the refrigerant following your normal recovery procedure, fix the problem then repeat the vacuum and charging procedures. Disconnect the charging station from the AC system and power. WARNING: Refrigerant will be trapped in the service hoses. Connect your recovery/recycling system to the auxiliary center service port on the charging station gauge set, open the gauge set hand valves and recover the refrigerant before connecting to another AC system.
COMPONENT INFORMATION
VACUUM PUMP (Part # SA322)
CAUTION: Do not operate the vacuum pump before adding oil. Use SKYE # SA132 vacuum pump oil or an oil specifically refined for deep vacuum type pumps. IMPORTANT: To reach maximum vacuum this pump must have clean, moisture free oil. Turn the vacuum selector valve to the OFF or CLOSED position and open the GAS BALLAST VALVE on the vacuum pump. Connect the charging station to power, turn the pump on for 5 to 10 seconds then turn it off. The oil level should be even with the TOP of the sight glass oil level line. [. . . ] POSSIBLE CAUSE Vacuum pump selector valve in wrong position. Vacuum selector valve in wrong position. Replace valve.
10
Auxiliary service port open or uncapped. Vacuum pump cycles on/off from cold start. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SKYPE EC14
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SKYPE EC14 will begin.
