Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SMART DEVICES MN520. We hope that this SMART DEVICES MN520 user guide will be useful to you.
Lastmanuals help download the user guide SMART DEVICES MN520.
Detailed instructions for use are in the User's Guide.
[. . . ] Each of six channels can be selected by the front panel Channel Selector Switch. The channels are labeled: LEFT-CENTER-RIGHT-LEFT SURROUND-RIGHT SURROUND-SUBWOOFER. [. . . ] Input wiring to the monitor amplifier may be a multiconductor shielded audio cable or with individual shielded audio cables for each channel. Since the MN520 is almost always mounted between the cinema stereo processor and the power amplifiers, wiring is generally very short. The input levels to the MN520 are set by the factory to monitor the outputs of the auditorium power amplifiers. If additional gain is required so that the cinema stereo processor is to be monitored, a slight change of the circuit is required. A 51 K ohm resistor is connected in series with the output of the channel selector switch. SMART maintains a factory service department to assist you in any service questions you may have. Technicians are available from 9:00 A. M. Eastern Time Monday through Friday.
The monitor must be mounted inside an equipment cabinet for safety. Be sure there is adequate ventillation for the power amplifier in this product.
Simple controls on the front panel allow the operator to adjust sound level in the booth and select individual stereo channels for monitoring. Normally, the monitor would be set to the center channel for general monitoring.
The power transformer connects to the two terminals on the far left. [. . . ] Be sure there is adequate ventillation for the power amplifier in this product.
Simple controls on the front panel allow the operator to adjust sound level in the booth and select individual stereo channels for monitoring. Normally, the monitor would be set to the center channel for general monitoring.
The power transformer connects to the two terminals on the far left. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SMART DEVICES MN520
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SMART DEVICES MN520 will begin.
