User manual SMART DEVICES SR300

[. . . ] Isolated operator's station with heavyduty rubber mounts reduce machine vibration transmitted to the operator. The hydraulically-assisted platform slides side-to-side to an infinite number of positions. A switch on the side console allows the operator to select any desired position for better overall visibility leading to increased productivity. The fully adjustable steering column and rotating seat are positioned to provide an optimal operating position. [. . . ] Input signals from sensors in the engine, propel, steering and rotor drive systems monitor current operating conditions. Provides information for troubleshooting and alerts the operator of potential system problems. The load control system automatically adjusts propel speed so that engine speed does not drop below 1800 rpm. Machine always works at peak efficiency for maximum output. The propel pump provides balanced flow to the dual displacement front drive motors. The Electronically Controlled Module (ECM) matches propel speed to the load on rotor. The machine operates at either maximum torque to propel the machine through the toughest conditions or a faster speed for moving around the job site. The propel lever and speed dial control infinitely variable machine speed. Equal hydraulic oil flow to each drive motor increases tractive effort in slippery conditions. 1 2 3 4 Caterpillar C11 Engine Electronic Control Modules Front Wheel Propel Pump Front Flow Divider Control Valve 5 Front Wheel Drive Motor 6 Rear Wheel Propel Pump (optional) 7 Rear Flow Divider Control Valve (optional) 8 Rear Wheel Drive Motor (optional) 7 Rear Wheel-Drive Optional rear wheel-drive includes a separate hydraulic pump and large displacement motors on each rear wheel. The system propels the machine with all-wheel drive. Tools are mounted in drive-in, knock-out holders for quick and easy replacement. Tools are mounted in drive-in, knock-out bolt-on tool holders and arranged in a chevron pattern for maximum breakout force. Allow for fast replacement without welding. Tool placement on rotor ends cleans up loose material and reduces wear on drum when maneuvering in the cut. Tools are mounted in drive-in, knock-out weld-on tool holders and arranged in a chevron pattern for maximum breakout force. Rings are hard-faced for extended service. Designed primarily for use in soil stabilization with secondary application in light cuts of road reclamation. Rings are hard-faced for extended service. 10 Serviceability Less time on maintenance means more time on the job. Daily service points are accessible from ground level and are grouped on one side of the engine. Hinged ground level side panels open wide for total access to engine components. [. . . ] falling Object Protective Structure (FOPS). Bolts directly to the ROPS which provides Level 1 protection and also serves as a sun canopy. Includes a rotating cloth seat, sound absorbing headliner, left and right side lockable doors, tinted glass, air conditioning, heater/defroster, dual front and rear windshield wipers and rubber floor mat. The cab is also radio-ready and includes a power converter, antenna with cable, two speakers and a headliner location for mounting. [. . . ]