User manual SMART DEVICES SRS-3 INSTALLATION

[. . . ] Isolated operator's station with heavy-duty rubber mounts reduce machine vibration transmitted to the operator. The hydraulically-assisted platform slides side-to-side to an infinite number of positions. A switch on the side console allows the operator to select any desired position for good visibility and comfort. The fully adjustable steering column and rotating seat are positioned to provide an optimal operating position. [. . . ] Items included with cab are: rotating cloth seat, left and right side lockable doors, tinted glass, air conditioning, heater/defroster, dual front and rear windshield wipers and sound absorbing floor mat. The cab also includes two cup holders and a 12-volt power receptacle. The cab is also radio-ready and includes a power converter, antenna with cable, two speakers and a headliner location for mounting radio. The cab offers an exceptional viewing area to the front tire edge, mixing chamber and to the rear wheels. The following features further enhance operator comfort; 1 Heating/air conditioning controls 8 1 4 2 Left and right access doors 3 Rotating cloth seat 4 Sound absorbing headliner 5 Tinted glass 9 6 Windshield wipers 7 Cushioned floor mat 8 Dual front mounted speakers 9 Radio-ready mount 10 Heavy-duty isolation mounts 6 5 2 3 10 7 6 Electronic Control Modules Reliable field-proven technology makes machine operation simple and self-diagnostics simplifies troubleshooting. Input signals from sensors in the engine, propel, steering and rotor drive systems monitor current operating conditions. Provides information for troubleshooting and alerts the operator of potential system problems. The load control system automatically adjusts propel speed so that engine speed does not drop below 1900 rpm. Machine always works at peak efficiency for maximum output. The dual propel pumps provide separate balanced flow to the front and rear dual displacement drive motors. The Electronically Controlled Module (ECM) matches propel speed to the load on rotor. Allows the operator to control the opening of the front door from the operator's station. The front door raises parallel to the cutting surface to prevent the door from plowing material in harsh soil stabilization conditions. The visual site gauge on rotor hood displays door position and allows the operator to precisely control the opening of the front door. 9 Rotor Selection Choice of two rotor designs for different applications and depth specifications. Tools are mounted in drive-in, knock-out holders for quick and easy replacement. Tools are mounted in drive-in, knock-out bolt-on tool holders and arranged in a chevron pattern for maximum breakout force. Allow for fast replacement without welding. Tool placement on rotor ends cleans up loose material and reduces wear on drum when maneuvering in the cut. Designed primarily for use in soil stabilization with secondary application in light cuts of asphalt reclamation. Intended for applications where material gradation is of less importance and where higher working speeds are desired. Rings are hard-faced for extended service. [. . . ] The ECM automatically aligns rear wheels to the center position for straight tracking. rear steer ­ controlled by a toggle switch , maintained by closed-loop control. Crab ­ front and rear wheels turn simultaneously in the same direction. Coordinated ­ front and rear wheels turn simultaneously in the opposite direction. [. . . ]