User manual SMART DEVICES SXL 735

[. . . ] Oscillating Rear Axle The fixed front, oscillating rear axle ensures four-wheel ground contact for optimum traction and stability. The front axle is rigidly mounted to the front loader frame, while the rear axle is allowed to oscillate. This configuration allows the operator's view of the scoop to remain constant as the rear axle oscillates enabling the operator to maintain a smooth and properly graded work area in any underfoot conditions. Load Sense Steering The steering system utilizes a variable displacement pump for maximum machine performance by directing power through the steering system only when needed. [. . . ] cat Planetary , Power Shift Transmission Electronic shifting provides smooth , consistent shifts. Large diameter clutches coupled with four planet gear trains provide added durability for extended, trouble free life. Structures Combining the use of robotic welding and castings in critical high stress areas, more than 80 percent of the machine structure is robotically welded to provide highly consistent welds and increased strength. Castings are also used in several areas to increase strength by helping spread the loads and reduce the number of parts. Axle-Shaft, Oil Disc Brakes These brakes are adjustment free, fully hydraulic and completely sealed. Disc face grooves provide cooling even when brakes are applied for a longer component life. The axle shaft brake design allows for brake service while leaving the final drive intact. â· Axle-shaft brakes require less force by operating on the low torque side of the axle. Combined with improved axle oil circulation for increased cooling, the oil-enclosed, multiple disc brake design improves durability. 4 Safety Entry and Exit Built to protect you Getting on and off the machine is one of the leading causes of injury on a job site. Cat coal scoops have a number of features to ensure your operator gets safely on and off the machine. Idle Shutdown (834 only) This new feature will automatically shutdown the engine after the machine has been in a safe idling state for an extended amount of time. The operator in the cab will be audibly and visually warned before the shutdown occurs. 7 Customer Support Selection Count on Cat dealers for business solutions Cat dealers can help customers compare and choose the right machine for their business. financing Cat dealers offer financing options to meet a variety of needs. Operation Improve operating technique for better productivity and profit with the latest Cat dealer training resources. Product Support Cat dealers are with customers every step of the way with unsurpassed worldwide parts support, trained technicians and customer support agreements. Operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 78 dB(A) for the cab offered by Caterpillar when properly installed, maintained and tested with the doors and windows closed. â· Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment. â· Exterior sound pressure level for the standard machine measured at a distance of 15 m (49. 2 ft) according to the test procedures specified in SAE J88 JUN86, mid-gear moving operation is 81 dB(A). â· Sound power level is 114 dB(A) measured according to the dynamic test procedure and conditions specified in ISO 6395:1988/ Amd. [. . . ] Operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 77 dB(A) for the cab offered by Caterpillar when properly installed and maintained and tested with the doors and windows closed. â· Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment. â· Exterior sound pressure level for the standard machine measured at a distance of 15 m (49. 2 ft) according to the test procedures specified in SAE J898 JUN86, mid-gear-moving operation is 81 dB(A). [. . . ]