User manual SMART PART SHOCKER SPORT TURBO

[. . . ] Shocker Sport TM Manual Includes: Shocker Sport 4X4 TM and Shocker Sport TurboTM WARNING!The Shocker SportTM Paintball Marker is not a toy. Misuse or careless use may cause serious injury or death. The user and any person within range must wear eye protection designed for paintball use. [. . . ] Failure to follow these precautions may result in damage to the gun and/or N grievous injury N to operator or bystanders. The disassembly of the Shocker SportTM into its three main parts is easy. Usually it is not necessary to remove the grip frame and the solenoid housing from the body to do normal maintenance of the components in the body. If you need to access the body or firing chamber skip down to the second paragraph in this section. The first step is to remove the grip frame from the solenoid housing. This is done using a 5/32" Allen wrench to loosen and remove the two screws holding the two parts together. If you have a front handle it takes the place of the front frame screw. Note: Use caution when separating the grip frame from the solenoid housing. The spring détente in the safety may come out. The battery pack must also be disconnected from the circuit board. The next step is to separate the solenoid housing from the main body. The four body screws must be loosened and removed using a Phillips screwdriver. Once this is done the solenoids must be disconnected from the circuit board. Disconnecting the solenoids is accomplished by unplugging the connector from the board itself. Now you have separated the gun into its three main parts. The body of the gun is the only part that can really be disassembled any further. The first and easiest part to remove is the bolt. To remove the bolt, simply grasp the knurled end and unscrew. A schematic of the bolt and its replacement seals is shown on page 13, figure 1. The next step is to remove all the parts to the firing chamber. The first part of this is the firing piston housing. This is located beneath the barrel in the front of the gun. [. . . ] Note: It is best to try this with a number of paintballs as they may vary from ball to ball. 2. Please call Smart Parts at 1-800-992-2147. How-to guides are also available at http://www. smartparts. com. When calling Smart Parts, make sure you have your gun and tools in front of you in order to remedy problem. 10 Parts List for the Shocker SportTM TM Shocker Parts (Page 12) 1. Gun Body Solenoid Housing Grip Frame Trigger Pin Safety Pin Trigger Push Rod Ball Tube Switch Cover (Tournament) Switch Cover (Recreational) 4X4 Circuit Board Battery 3-Way Solenoid 4-Way Solenoid Solenoid Gaskets and Screws Trigger Spring 31. [. . . ]