User manual SMART MX 16

[. . . ] MX 16 Digital Satellite Receiver with integrated Cryptoworks interface Operating Instructions Version 2. 06. 05. 06 Foreword These operating instructions are designed to assist you in using the MX 16 CY Digital Satellite Receiver (hereafter called "the Receiver") · in accordance with these instructions, · safely, and · in the most efficient way. We assume that users of the receiver possess a general knowledge of operating electronic media equipment. Any person, who · installs, · connects-up, · operates, · cleans, or · disposes of this receiver must have acquainted himself fully with these operating instructions. [. . . ] All settings undertaken subsequently and any stored data will be erased. Call up the "Works Settings" sub-menu. Select "Yes" if the receiver is to be returned to the works settings. Select "No" to leave the menu. If "Yes" has been selected, then the receiver automatically tries to re-programme and update the channels using the RAPS system (see page 56). To return to the TV programme, press the "EXIT" button. 34 9BOperation Operation Basic operating steps Switching between radio and TV modes If located in a menu, leave using the "EXIT" button. . To change between radio mode and TV mode, press either the "TV" button or the "RADIO" button. Selecting a channel To change to the previous or subsequent channel, press the arrow buttons " " or " " or channel buttons "CH +" or "CH ­" You can also press the arrow buttons on the receiver " " or " ". Switching to a desired channel can be done by directly entering the channel number on the numeric buttons. Volume To increase or decrease the volume, press the "VOL +" or , , VOL ­" or the " " and " " buttons. Press the "Mute" button to switch off the sound. 35 9BOperation Additional functions Display additional information The following information regarding the current channel can be displayed: · Channel (Name, position, settings, title of programme) · Brief description of contents To display additional information on the screen, press the "INFO" button. Each time the button is pressed the displayed information changes. This function is only available if the station broadcasts the relevant information. Display list of channels To display the list of TV and/or radio channels press the "TV" or "RADIO" button. Highlight a station using the arrow buttons " " and " " or " " and " ". To change to the marked station, press the "OK" button. To return to the selection menu, press the "EXIT" button. Press the "TV" or "RADIO" button again to return to the normal screen setting. 36 9BOperation Using the selection menu The list of stations in the selection menu can be sorted or selected according to various criteria. The list of stations of all satellites received or those of a certain satellite can be displayed. Select the satellite in the sub-menu "Sat" using the arrow buttons " " and " ". Select the desired type of sort criteria in the sub-menu "List": Symbol All (1. 2. 3. . ) All (A. B. C. . ) Free (1. 2. 3. . ) Free (A. B. C. . ) Option All stations sorted numerically All stations sorted alphabetically All unencoded stations sorted numerically All unencoded stations sorted alphabetically Select the desired channel using the arrow buttons " " or " ". Display list of favourites To call up the list of favourite stations, press the "FAV" button during operation. [. . . ] After finishing making the selections, mark the "OK" space using the arrow buttons " " or " " and " " or " ". The settings are now stored. 58 14BRAPS Switching the automatic check of the RAPS listing on and off RAPS is set, so that after switching-on the receiver automatically checks if a new RAPS listing with changed transmitter data is available. The check can be stopped by pressing the "EXIT" button. If the automatic update process is not required, then proceed as follows: Press the "SET UP" button and enter the PIN code using the numeric buttons. [. . . ]