User manual SMC 7901WBRA2

[. . . ] EZ Connect N ADSL2 BARRICADE TM Draft 11n Wireless USB2. 0ADSL/ADSL2 Modem Router 1-Port Wireless Annex A Adapter SMC7901WBRA2 Fast Ethernet Router with built-in ADSL2/2+ Modem From SMC's line of award-winning connectivity solutions March 2009 R. 01 f/w 1. 0 Copyright Information furnished is believed to be accurate and reliable. However, no responsibility is assumed by our company for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of our company. We reserve the right to change specifications at any time without notice. Copyright © 2009 by SMC Networks, Inc. [. . . ] Key differences between WPA and WEP are user authentication and improved data encryption. Set WEP Key It is available when you set to WEP. Click it, the Wireless Wep Key Setup page appears. RADIUS is based on a client-server model that supports authentication, Authentication Server RADIUS authorization and accounting. The access point is client and the server is RADIUS server. RADIUS is a simple package exchange in which your router acts as a message relay between the wireless station and the network RADIUS server. The default port of the RADIUS server for authentication is 1812. You need not Port IP Address Password Apply Changes change this value unless your network administrator instructs you to do so with additional information. Enter the IP address of the RADIUS server. Enter a password as the key to be shared between the external authentication server and the access point. This key must be the same on the external authentication server and your router. Description Click Set WEP Key, the page shown in the following figure appears. 27 The following table describes the parameters and buttons of this page. Field SSID TYPE Key Length Select the SSID. Select 64-bit or 128-bit to use data encryption. If you choose 64-bit, you can choose ASCII (5 characters) or Hex (10 Key Format characters). If you choose 128-bit, you can choose ASCII (13 characters) or Hex (26 characters). Default Tx Key Select the default encryption key. The Encryption keys are used to encrypt the data. Both router and wireless stations must use the same encryption key for data transmission. If you choose 64-bit and ASCII (5 characters), enter any 5 ASCII characters. If you choose 64-bit and Hex (10 characters), enter any 10 hexadecimal Encryption Key 1 to 4 characters. If you choose 128-bit and ASCII (13 characters), enter any 13 ASCII characters. If you choose 128-bit and Hex (26 characters), enter any 26 hexadecimal characters. [. . . ] If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. [. . . ]