User manual SMEG 1000N

[. . . ] 7 Glass Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Plastic scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ARRANGING FOOD IN THE APPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] • When your fridge is placed next to a deep freezer, there should be at least 2 cm between them to prevent humidity on the outer surface. Do not place anything on your fridge, and install your fridge in a suitable place so that at least 15 cm is available on the upper side. • If you will place your fridge next to your kitchen cabinets, leave a space of 2 cm between them. • Install the distance adjustment plastic (the part with black vanes at the rear) by turning it 90° to prevent the condenser from touching the wall. • The adjustable front legs should stabilized in an appropriate height to allow your fridge operate in a stable and proper way. You can adjust the legs by turning them clockwise (or in the opposite direction). This should be done before placing food in the fridge. • Before using your fridge, wipe all parts with warm water added with a tea spoonful of sodium bicarbonate, and then rinse with clean water and dry. Place all parts after cleaning. Before using your fridge • When it is operated for the first time or after transportation, keep your fridge in the upright position for 3 hours and plug it on to allow efficient operation. Otherwise, you may damage the compressor. • Your fridge may have a smell when it is operated for the first time; the smell will fade away when your fridge starts to cool. ’ • To set super switch ON that is on the thermostat box, press the switch down to ' position. The switch will lit. • When the freezer compartment is cooled down to sufficient temperature, or the weather gets hot, turn the super switch off to save electrical consumption. ( ) • When you first switch on the appliance, for starting a suitable cooling, the appliance should work 24 hours continuously until it cools down to sufficient temperature. • In this time do not open the door so often and place a lot of food inside the appliance. If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting or re-plugged the unit in order not to damage the compressor. Accessoires Making ice cubes (In some models) • Pull the lever toward you and take out the ice making tray • Fill the water in level of line. • Hold the left end of the lever and set the ice-tray on the icebox • When ice cubes are formed, twist the lever to drop off ice cubes into the ice box. Do not fill the icebox with water in order to make ice. It can be broken. EN - 6 - If turbo fan is available on your product ; Turbo fan • Do not block air inlet and outlet openings when storing food, otherwise air circulation that provided by turbo fan will be impaired. Glass Shelf There are details both on the body and on the glass shelfs for hanging the glass shelfs . You can replace glass shelfs in different varitions. Drawer Drawers on the crisper are optional in the product. You can remove the drawers and use the refrigerator without them. shelf grooves You have to push the drawers till stopers not to prevent air flow. The conditions of this part are the same with the refrigerator. stoppers Plastic scraper After a period of time, frost will build up in certain areas in the freezer compartment. The frost, accumulated in the freezer, should be removed periodically. [. . . ] What to do if your refrigerator performs poorly; Check that; • You have not overloaded the appliance , • The doors are closed perfectly , • There is no dust on the condenser , • There is enough place at the rear and side walls. If there is noise; The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling sound) even when the compressor is not running. If these sounds are different check that; • The appliance is well levelled • Nothing is touching the rear. • The stuffs on the appliance are vibrating. [. . . ]