User manual SMEG 52E.2

[. . . ] 30 3. 2 Your environmental care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GET TO KNOW YOUR APPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 4. 1 Description of the controls on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AVAILABLE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 4. 1. 4 Hob burners control knob Standard heating The circle next to each knob indicates the cooking zone it controls. To switch a zone on, press the knob and turn it to the required position. Adjustment is continuous, so the appliance functions when set to the intermediate values as well. To switch off a zone, return the knob to 0. Double heating The circle next to each knob indicates the cooking zone it controls. To switch the inner cooking zone on, press the knob and turn it to the required position. To switch on both the inner and outer zone, turn the knob to / then release it. The knob will return to the maximum intensity position for the hot plate. To adjust the heat intensity, turn the knob anti-clockwise to the 0 position. To go back to heating the inner zone only, return the knob to 0 then turn it to the required position. To switch off a zone, return the knob to 0. 32 Instructions for the user 5. If melting does occur, in order to avoid compromising the condition of the hob surface, immediately switch it off and remove the melted material using the scraper provided, while the hob is still warm. Failure to clean the glass ceramic hob straight away could lead to encrustations which are impossible to remove once the hob has cooled down. Important Supervise children carefully as they cannot readily see the residual heat indicator lights on the hob. The cooking zones remain hot for a certain period of time even after they have been turned off. Make sure that children do not touch the hob at any time. 34 Instructions for the user 7. USING THE OVEN 7. 1 Before using the appliance · Remove any labels (apart from the technical data plate) from trays, dripping pans and the cooking compartment. Remove any protective film from the outside or inside of the appliance, including from accessories such as trays, dripping pans, the pizza plate or the base cover. Before using the appliance for the first time, remove all accessories from the oven compartment and wash them as indicated in "9. CLEANING AND MAINTENANCE". · · Heat the empty appliance to the maximum temperature in order to remove any manufacturing residues which could affect the food with unpleasant odours. 7. 2 Oven runners The oven features 4 runners for positioning trays and racks at different heights. The insertion heights are indicated from the bottom upwards (see figure). 7. 3 Cooling system The appliance is equipped with a cooling system which comes into operation as soon as a cooking function starts. The fan causes a steady outflow of air that exits from the rear of the appliance and which may continue for a brief period of time even after the appliance has been turned off. 7. 4 Internal light The oven light comes on when the door is opened (on some models only) or any function is selected. 35 Instructions for the user 7. 5 General warnings and advice for use All cooking operations must be carried out with the door closed. [. . . ] Warning: before removing the glass panels, make sure that at least one of the door's hinges has been locked in the open position as described in chapter "10. 2 Removing the door". This operation may have to be repeated during the glass removal process if the door is accidentally freed. Removing the internal glass panel: · Remove the internal glass panel by pulling the rear part gently upwards, following the movement indicated by the arrows (1). · Then pull the front of the glass panel upwards (2). [. . . ]