User manual SMEG A63AS.2

[. . . ] 8 3. 2 Your environmental care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GET TO KNOW YOUR APPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4. 1 Description of the controls on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AVAILABLE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If any liquid does boil over or spill, remove the excess from the hob. To prevent burns or damage to the hob during cooking, all pans or griddles must be placed inside the perimeter of the hob. All pans must have smooth, flat bottoms. If the flame accidentally goes out, turn off the control knob and wait at least 1 minute before trying to re-light the burner. Take the greatest care when using fats or oils since they may catch fire if overheated. 13 Instructions for the user 6. 4 Pan diameters Burner Auxiliary Semi-rapid Ultra-rapid Ø min. (cm) 14 24 23 To prevent damage to the appliance or adjacent units, all pans or griddles must be placed inside the perimeter of the hob. Make sure never to come into contact with the lid glass with pots or pans that are still hot. The glass could crack and break with the heat. 14 Instructions for the user 7. USING THE OVEN 7. 1 Before using the appliance · · · Remove any labels (apart from the technical data plate) from trays, dripping pans and the cooking compartment. Remove any protective film from the outside or inside of the appliance, including from accessories such as trays, dripping pans, the pizza plate or the base cover. Before using the appliance for the first time, remove all accessories from the oven compartment and wash them as indicated in "9. The logic prevents the setting of incompatible values (e. g. the programmer will not accept a cooking end time with a duration which is too long for its value). 17 Instructions for the user 7. 6. 4 End of cooking At the end of cooking the oven will switch off automatically and simultaneously a buzzer will start to sound intermittently. After the buzzer has been deactivated, the display will return to show the current time together with the 7. 6. 5 Timer The programmer can also be used as an ordinary timer. Press the key and the display will show the figures or ; keep pressed and simultaneously symbol to indicate that the oven has returned to manual use mode. press the value modification keys . When the key is released the count will start and the . display will show the current time and the symbol After the setting, to display the time left press the key. In timer mode, the oven operation will not be cut out at the end of the set time. 7. 6. 6 Adjusting the buzzer volume The buzzer volume can be varied (3 settings) while it is in operation by pressing 7. 6. 7 Stopping the buzzer The buzzer stops automatically after about seven minutes. It can be deactivated manually by pressing keys and together. To switch off the appliance, return all the knobs to the 0 setting. 7. 6. 8 Deleting the set data Having programmed a semi-automatic or automatic cooking operation, this programming can be cancelled by holding down the key for the function which has just been programmed and simultaneously pressing or until appears on the display. The programmer will interpret the cancellation of the program as terminating the cooking operation. [. . . ] Do not remove this plate for any reason. A copy of the plate is attached to the instructions. The appliance must be connected to the power supply by a qualified technician. Before performing any operations, switch off the power supply to the appliance. The appliance must be connected to earth in compliance with electrical system safety standards. Where the appliance is connected to the power grid via plug and socket, both of these must be of the same type and connected to the power cable in accordance with current standards. [. . . ]