User manual SMEG APLF170

[. . . ] 6 BEFORE CALLING YOUR AFTER SALES SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PARTS OF THE APPLIANCE AND THE COMPARTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEFORE USING THE APPLIANCE Safety Instructions · Please read this booklet thoroughly before installing and switching on the appliance. The manufacturer assumes no responsibility for incorrect installation and usage. [. . . ] Keep the appliance ventilation openings free. Do not damage the refrigerator's refrigerant circuit. Switching On the Appliance · Before switching on, place the appliance on upright position and wait at least three hours without moving the appliance. This will give the refrigerant circuit time to settle and operate efficiently. · Clean the appliance thoroughly, especially in the interior, before use (See Cleaning and Maintenance). · Installation of the appliance and electrical connections must be carried out by a qualified technician, in accordance with the Installation Manual and local regulations. · Installation procedure into the kitchen unit is given in the Installation Manual. This product is intended to be used in proper kitchen units only. · The appliance must be connected with a properly installed fused socket. Power supply (AC) and voltage at the operating point must with the details on the name plate of the appliance (name plate is located on the inside left of the appliance). · Insert the plug into a socket with an efficient ground connection. If the socket has no ground contact or the plug does not match, we suggest you to call an authorized electrician for assistance. · Manufacturer is not responsible for failure to complete the ground connection as described in this booklet. · There can be an odor when you first switch on the appliance. It will disappear after the appliance starts to cool. · The plug must be accessible after installation. UK - 3 - PART 2. HOW TO OPERATE THE APPLIANCE Thermostat Setting · Thermostat automatically regulates the inside temperature of the refrigerator compartment and freezer compartment. By rotating the knob from position 1 to 5, colder temperatures can be obtained. · The " 0 " position shows thermostat is closed and no cooling is available. · For short-term storage of food in the freezer compartment, you can set the knob between minimum and medium position (1-3). · For long-term storage of food in the freezer compartment, you can set knob medium position. (3-4) · Note that; the ambient temperature, temperature of the freshly stored food and how often the door is opened, affects the temperature in the refrigerator and freezer compartments. If required, change the temperature setting. · When you first switch on the appliance, you should ideally try to run it without any food in for 24 hours and not open the door. [. . . ] If there is water in the lower part of the refrigerator; Check if; The drain hole for defrost water is not clogged (use defrost drain plug to clean the drain hole). If your fridge is not cooling enough; Your fridge is designed to operate in the ambient temperature intervals stated in the standards, according to the climate class stated in the information label. We do not recommend operating your fridge out of stated temperatures value limits in terms of cooling effectiveness. Climate Class T ST N SN Ambient Temperature (°C) Between 16 and 43 (°C) Between 16 and 38 (°C) Between 16 and 32 (°C) Between 10 and 32 (°C) (*) Tropical class is designated for temperatures between 16°C and 43°C according to TS EN ISO 15502 standards. UK - 7 - Recommendations · In order to increase space and improve the appearance, the "cooling section" of refrigerators is positioned inside the back wall of the refrigerator compartment. [. . . ]