User manual SMEG BLF01PGEU

[. . . ] • Children must never play with the appliance. • Never rest metallic objects such as knives, forks, spoons and lids on the appliance during use. • Switch the appliance off immediately after use. • Never try to put out a fire or flames with water: turn off the appliance and smother the flames with a fire blanket or other appropriate cover. [. . . ] After a few seconds the and indicator lights stop flashing. The appliance waits for the set start time. 53 EN Use 5. At the end of the cooking time STOP appears on the display and a buzzer sounds that can be deactivated by pressing the temperature knob. Modifying the data set during programmed cooking After modifying the cooking duration, the end of cooking time must be re-set. During operation, it is possible to modify programmed cooking duration: 1. When the and indicator lights are lit steadily and the appliance is waiting for cooking to start, press the temperature knob twice. Turn the temperature knob right or left to alter the pre-set cooking time. The indicator light switches off and the indicator light starts flashing. Turn the temperature knob right or left to delay the cooking end time. After a few seconds the and indicator lights stop flashing and programmed cooking restarts its operation with the new settings. To extend the cooking time manually, press the temperature knob again. The appliance resumes its normal operation with the previously selected cooking settings. • Keep the inside of the appliance clean at all times. • (Where fitted) When it is not being used, remove the pizza plate and put the cover back in its slot. 55 EN Use 3. 7 Special functions and automatic programs Timed defrosting Proving 1. Select the timed defrosting function, indicated by the symbol, using the function knob. Press the temperature knob to set the duration. Turn the knob to adjust the value (from 5 seconds to 99 minutes). Press the function knob to start defrosting. At the end, the word STOP will be displayed. It is not possible to modify the temperature of the proving function. For successful proving, a container of water should be placed in the bottom of the oven. Position the dough for proving on the second shelf. Press the function knob to select and activate proving. At the end of preheating, the text “START” flashes. [. . . ] Completely remove all accessories from inside the oven. Remove the bulb cover using a tool (e. g. Slide out and remove the lamp. Do not touch the halogen lamp directly with your fingers, but wrap it in an insulating material. 70 Installation 5 Installation 5. 1 Electrical connection Power voltage Danger of electrocution • Have the electrical connection performed by authorised technical personnel. • The appliance must be connected to earth in compliance with electrical system safety standards. [. . . ]