User manual SMEG CE9CMX

[. . . ] PRECAUTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECYCLING INSTRUCTIONS - OUR ENVIRONMENT POLICY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To turn off the oven, turn the PT2 knob to the O position. Modifying the programmed data: Once the count has begun, the previously set data can be modified. Repeat the operations described in point "10. 2. 1 Using the minute minder". 10. 3 Selecting a function A cooking function can be selected by simply turning PT2 to the right or left to the desired function. After having selected the cooking function, use the PT1 knob to select the desired temperature. Cooking is preceded by a preheating stage, which allows the oven to heat to the cooking temperature more quickly. The symbol flashes on the display to indicate that this stage is in progress. When the symbol will remain on and a buzzer will sound to indicate that the food preheating stage is over, the can be placed inside the oven. 36 Instructions for the User 10. 4 Programmed cooking procedures 10. 4. 1Semiautomatic cooking Semiautomatic cooking is the function which allows a cooking operation to be started and then ended after a certain length of time set by the user. Select a function and the temperature (see paragraph 10. 3). Press the key on the display; the or symbol will flash and the keys. symbol will appear; if you do not set a time within a few seconds, the oven will return to manual mode; otherwise, you can set a cooking time (max 23. 59) using the Once the desired cooking time value is reached, the symbol stays lit. At the end of the cooking time, the message STOP will appear on the display, cooking will be interrupted and a buzzer will sound that can be deactivated by pressing the key. If you wish to continue cooking beyond the set time, press the button again. The oven will restart normal operation with the previously selected cooking settings. To turn off the oven, turn the PT2 knob to the "O" position. During semi-automatic cooking, the temperature values and the desired function can be modified without changing the previously set time. Modifying the data set: Once semiautomatic cooking has started, its duration can be changed. When the The symbol is steady and cooking is in progress, press the key. or keys. symbol starts flashing and it is possible to change the cooking time using the A few seconds after the last change, the restart from the new value. 10. 4. 2Automatic cooking symbol will stop flashing, and semiautomatic cooking will Automatic cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user. Select a function and the temperature (see paragraph 10. 3). Press the key on the display; the or symbol will flash and the keys. symbol will appear; if you do not set a time within few a seconds, the oven will return to manual mode; otherwise, you can set a cooking time (max 23. 59) using the Press the key again; the symbol will start to flash; if you do not set a time within a few seconds, the oven will return to semiautomatic mode; otherwise, you can set a cooking time (max 23. 59) using the or keys. A few seconds after the last change, the display will show the current time and the oven will be in standby waiting for the set start time. [. . . ] Check whether an omnipolar switch upstream from the oven feed line is in the "ON" position. Check whether the "showroom" mode has been set, for further details see point "10. 7 Secondary menu". Check whether the "child lock-out function" mode has been set, for further details see point "10. 7 Secondary menu". Check whether the "power limiter" mode has been set, for further details see point "10. 7 Secondary menu". [. . . ]