User manual SMEG CWG410MR-1

[. . . ] Our appliances are environmentally friendly: some of the materials are recyclable while others are disposed of and destroyed. To protect the environment, dispose of your appliance by delivering it to the authorized dealer. Appliance description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] is a separate short time defined · Wool program - Selection of additional functions Button B (MENU) moves you within the menu, button C (SELECTION) serves to select options (see cf. 12 129530 Only MENU functions available for a particular program are displayed. When the preferred additional function is selected, the display indicates relevant symbol. After the appliance is switched off, all additional functions, except the sound signal and child lock, are reset to their original settings. Delayed start Default setting does not include delayed start (display indicates 00:00 hours). Use button C to select between 0 and 20 hours. For the first two hours the sequence may be set at 30 minute lapses, after that the sequence is 1 hour. When the preset time elapses, the selected program starts. In case of power failure prior the end of the countdown (display flashes POWER FAILURE), press button D (START). Reduced temperature This function is selected if you wish to dry laundry at lower temperature than the program default (see Program Chart). By selecting this function the drying time is longer. Sound signal (audible warning) In default setting the sound signal is on. - End of drying procedure At the end of the drying procedure the display indicates END and CLEAN FILTER, and the beep is heard. In case of condenser dryer the display intermittently flashes CLEAN FILTER - EMPTY CONTAINER. If the appliance is not switched off and/or the door is not opened, the anti-crease program switches on (according to settings from cf. Selection of additional functions) and the dryer continues with gentle tumbling. Pull the power lead from the socket and cut the power supply from the mains. Interruptions · By the user Changing the program or the functions After drying be careful when extracting laundry from the appliance, as it may be hot!Prior any changes child lock must be deactivated!By pressing button D (START/PAUSE) the drying program is paused; display reads PAUSE. You can now change additional settings or basic programs. Press MENU to enter any menu and change additional settings or select another drying program. You can switch the appliance off (turn jog A to the position "0") and reset all preferred settings. 129530 17 Door opened If the door is opened during the drying process this will pause the operation; the display reads DOOR OPEN. [. . . ] · If the laundry loaded in the drum has not been spun enough or if appropriate drying time has been set. · If the room is too hot (over 25°C, applies for condensation dryer). · If the room temperature is too high. · If the condensation device is clean. [. . . ]