User manual SMEG DRY8SSA

[. . . ] Never touch the machine with your wet, damped hand or foot. Never open the detergent compartment when the appliance is running. Never force the door to open when the washing machine is running. Do not touch discharging hose and water during discharging as the appliance may reach high temperatures when running. [. . . ] You can open the door of your machine 2 minutes after the completion of washing operation. (The duration of 2 minutes required to open the door of your machine is not included in the washing period. ) 15-SUPER RAPID 15 min. 30 2 2 Program duration, energy consumption and water consumption values may vary according to wash load weight and type, selected extra functions, tap water and ambient temperature 23 CHAPTER 6: OPERATING YOUR MACHINE AUXILIARY FUNCTIONS 1-Washing water temperature selection You can select the washing water temperature with the washing water temperature adjustment button. Whenever you select a new programme, the maximum washing water temperature is shown on the washing water temperature display. You can gradually decrease the washing water temperature between the maximum temperature and cold washing (--) by pressing washing water temperature adjustment button. If you have missed the washing water temperature you wanted, you can return to the intended temperature by continuously pressing the washing water temperature adjustment button. 24 CHAPTER 6: OPERATING YOUR MACHINE AUXILIARY FUNCTIONS 2-Auxiliary function for delay timer By using this auxiliary function, you can let your machine start washing after 1 hour to 23 hours. To use auxiliary function of delay timer: - Press time delay button once. - Expression of “1h” will appear on the display. - Press on time delay button until the time, on which you want washing operation to be started. - To activate the time delay you have selected in the programme, you may press on any auxiliary function button you like except “Start/Pause” button. If you have skipped the time delay you want to set, you can go back to the time desired by keeping pressed on delay timer button. If you want to cancel the delay timer, you are required to press the delay timer button once. To run delay timer function, your machine is required to be operated by pressing on Start/Pause button. As soon as you start your machine, the count down process will start on the electronic display based on the delay period you have selected. 25 CHAPTER 6: OPERATING YOUR MACHINE AUXILIARY FUNCTIONS 3. Auxiliary function for easy ironing Your laundry will be less creased if the easy ironing auxiliary function is pressed/selected. 26 CHAPTER 6: OPERATING YOUR MACHINE STARTING THE PROGRAMME Start/Pause button By pressing on Start/Pause button, you may start the programme you have selected, suspend a running programme. If you switch your machine to pause mode, electronic display will blink. When you start your machine, the following symbols for the programmes you have selected will be available on electronic display. Disassemble the filters on the side of faucet side of water inlet hoses manually and clean it. Having the filters cleaned, you can fit them in the same way reversely. CAUTION: Filters of water inlet valves may be clogged due to contaminated water faucet or lack of necessary maintenance or valves may be broken down, causing water leaking into your machine continuously. For these reasons, breakdowns that may arise are out of scope of warranty. 33 CHAPTER -8: MAINTENANCE AND CLEANING OF YOUR MACHINE / PUMP FILTER A filter system which avoids threads remaining from your laundries and tiny materials from entering into the pump during water discharging operation carried out by your machine after completing washing so prolonging the lifecycle of your pump is available. It is recommended that you clean your pump filter once in 2 months. To clean pump filter: Depress the lug downwardly to uncover the pump section of the toe board and pull it towards yourself and extract it. Before opening the filter cover, settle a vessel in front of the filter cover to prevent the water remained in the machine from flowing on the ground. Loosen the filter cover in counter-clockwise and then empty water. Clean the foreign materials in the filter. Check whether the pump rotates with your hands. 34 CHAPTER -8: MAINTENANCE AND CLEANING OF YOUR MACHINE / PUMP FILTER After cleaning the filter, fit the filter cover by rotating it in clockwise. Remember that water will leak if you do not fit the filter cover properly. You can use the pump section of the toe board for discharging slight amount of water remaining in the pump of your machine. WARNING!As water in the pump may be hot, wait until it cools down. 35 CHAPTER -8: MAINTENANCE AND CLEANING OF YOUR MACHINE / DETERGENT DRAWER Your detergents may deposit residue in detergent drawer and housing of detergent drawer over time. [. . . ] Water in the non-visible part of the drum. Non-dissolving particles of some detergents may adhere to your laundries as white spots. Perform an extra rinsing by setting your machine to “Rinsing” Laundries have programme, or clean detergent residues on the spots using a them. Apply the maximum amount of detergent The reason for this instructed by the Grey spots appear on spots may be oil, detergent the laundries. manufacturer in the next washing operation. [. . . ]