User manual SMEG EP41R3L

[. . . ] SEPARATE THE VARIOUS WASTE MATERIALS AND TAKE THEM TO THE NEAREST SELECTIVE WASTE COLLECTION CENTRE. THE APPLIANCE MUST BE EARTHED IN COMPLIANCE WITH ELECTRICAL SYSTEM SAFETY REGULATIONS. [. . . ] They can constitute a suffocation hazard for children, especially the plastic bags. Your old appliance also needs to be disposed of correctly. Important: hand over your appliance to the local agency authorised for the collection of electrical appliances no longer in use. Correct disposal means intelligent recycling of valuable materials. Before disposing of your old appliance remove the door and leave the racks in their normal working positions so that children cannot get stuck in the compartment whilst playing. It is also necessary to cut the interconnecting cable to the power supply network, removing it along with the plug. INFORMATION FOR USERS Pursuant to Directives 2002/95/EC, 2002/96/EC and 2003/108/EC relating to the reduction of the use of hazardous substances in electrical and electronic appliances, as well as to the disposal of refuse, the crossed-out bin symbol on the appliance indicates that the product, at the end of its useful life, must be collected separately from other refuse. Therefore, the user must consign the product that has reached the end of its working life to the appropriate differentiated collection centres for electrical and electronic refuse, or deliver it back to the retailer when purchasing an equivalent product, on a one for one basis. Adequate selective collection for the subsequent forwarding of the decommissioned product to recycling, treatment and ecologically compatible disposal contributes to avoiding possible negative effects on the environment and on health and promotes the recycling of the materials of which the appliance consists. Illicit disposal of the product by the user will result in the application of administrative sanctions. 13 Instructions for the installer 3. INSTALLING THE DISPLAY UNIT The appliance must be installed on a free-standing horizontal work top. The distance from the rear wall must allow easy access to the terminal board for connection of the power supply cable. [. . . ] CLEANING Important: do not aim jets of water directly against the appliance; avoid the use of pressure jets. Before performing any operations, switch off the power supply. 5. 1 Cleaning the Plexiglas parts Use specific products for cleaning. [. . . ]