User manual SMEG F608SB

[. . . ] INSTRUCTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 ENVIRONMENTAL RESPONSIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 GET TO KNOW YOUR OVEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use original SMEG accessories only. 5. 1 Using the rack or tray The racks and trays are equipped with a mechanical safety lock which prevents them from being taken out accidentally. To insert the rack or tray correctly, check that the lock is facing downwards (as shown in the figure at the side). To remove the rack or tray, lift the front slightly. The mechanical lock must always face the back of the oven. Insert racks and trays fully into the oven until they come to a stop. 40 Instructions for the user 6. FRONT PANEL All the controls and indicator lights can be seen on the front panel. The tables below describe the symbols used. TIMER KNOB This knob enables manual cooking or the timer to be selected; the timer switches off the oven automatically at the end of cooking. If no cooking time is selected, the timer knob must be positioned on . To set the cooking time, turn the knob clockwise until it reaches the "90" position and then set the desired cooking time. The numbers from 5 to 90 correspond to minutes. Adjustment is progressive so that the time can also be set to any intermediate value between these numbers. At the end of the programmed cooking time, a buzzer will sound and switch off automatically after 4-5 seconds. THERMOSTAT KNOB The cooking temperature is selected by turning the knob clockwise to the desired setting, between 50° and 250°C. 41 Instructions for the user THERMOSTAT INDICATOR LIGHT (RED) When this light comes on, the oven is heating up. When this light goes out, the preset heating temperature has been reached. When the light flashes, the temperature inside the oven is steady. FUNCTION SELECTOR KNOB Turn the knob clockwise or anti-clockwise to select a function from the following options: (See 8. COOKING WITH THE OVEN). STATIC OVEN FUNCTION LARGE GRILL FUNCTION FAN-ASSISTED BOTTOM FUNCTION LARGE FAN-ASSISTED GRILL FUNCTION FAN-ASSISTED STATIC FUNCTION ECO FUNCTION 42 Instructions for the user 7. USING THE OVEN 7. 1 · Before using the appliance Remove any labels (apart from the technical data plate) from trays, dripping pans and the cooking compartment. Remove any protective film from the outside or inside of the appliance, including from accessories such as trays, dripping pans, the pizza plate or the base cover. Before using the appliance for the first time, remove all accessories from the oven compartment and wash them as indicated in "9. CLEANING AND MAINTENANCE". · · Heat the empty appliance to the maximum temperature in order to remove any manufacturing residues which could affect the food with unpleasant odours. 7. 2 General Description 7. 2. 1 Oven runners The oven features 4 runners for positioning trays and racks at different heights. The insertion heights are numbered from the bottom upwards (see figure). 43 Instructions for the user 7. 2. 2 Cooling system The appliance is equipped with a cooling system which comes into operation as soon as a cooking function starts. This system is recommended for sterilising or for finishing off the cooking of foods which are already well-cooked on the surface, but not inside, which therefore need a little more heat. Perfect for any type of food. FAN-ASSISTED GRILL: The air produced by the fan softens the strong heatwave generated by the grill, giving perfect grilling results even with very thick foods. [. . . ] Remove the intermediate panel by lifting it upwards. Cleaning: · It is now possible to clean the external glass panel and the panels removed previously. In the case of stubborn dirt, wash with a damp sponge and neutral detergent. Replacing the glass panels: · Replace the panels in the reverse of the order in which they were removed. · Reposition the internal glass panel, taking care to centre and insert the 4 pins attached to the glass into their slots in the oven door by applying slight pressure. 57 Instructions for the installer 11. INSTALLING THE APPLIANCE 11. 1 Electrical connection The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance. Do not remove this plate for any reason. [. . . ]