User manual SMEG GW6090

[. . . ] You can often fix minor problems yourself, without having to call in an engineer. Please keep this manual in a safe place and pass it on to new owners for their information and safety. Disposing of old appliances The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring that this product is disposed of correctly, you will help to protect the environment and human health, which could otherwise be harmed through the inappropriate disposal of this product. [. . . ] Cooking zone selection buttons Stand-by dot Suitable for induction cooking Switching off a cooking zone 5. The stand-by dot of the cooking zone selected must light up. It may be necessary to press the cooking zone selection button. a) Press the minus button display shows 0, or several times until the power setting b) press the minus button and the plus button once at the same time. The cooking zone is switched off direct irrespective of the power setting or c) press the on/off button . The entire hob will be switched off (all of the cooking zones are switched off). Switching off the hob 7. The hob will be completely switched off, irrespective of any settings. 23 Operation STOP function GB The cooking process can be briefly interrupted with the STOP function, e. g. The STOP function must be released in order to continue cooking at the same power level. If a timer has been set it will pause and will then continue. This function is only available for 10 minutes for reasons of safety. Pots and pans are on the cooking zones and the required power levels have been set. In order to program the automatic-switch-off device for another cooking zone, press the timer selection button repeatedly until the timer indicator lamp for the required cooking zone blinks. Then use the minus button or the plus button to set the required time. The cooking zone will be switched off when the time has lapsed. A signal will sound for a while and can be switched off by pressing any button (except for the on/off button). Timer indicator lamp Stand-by dot for the automatic switch-off device Minute minder lamp Please note · In order to check the time that has lapsed (automatic-switch-off device) press the timer selection button repeatedly until the timer indicator lamp for the required cooking zone blinks. The setting displayed can be read and changed. · Terminating the function of the timer: select the respective cooking zone (timer indicator lamp blinks) and press the plus and minus buttons once at the same time. Minute minder (egg timer) 1. Press the timer selection button until the minute minder lamp blinks with this button. Use the minus button or the plus button to set the time in minutes. Once the time has lapsed a signal will sound for a while and can be switched off by pressing any button (except for the on/off button). The minute minder remains in operation when the induction cooker is switched off. Switch the hob on with the on/off button to adjust the time. 25 Operation Automatic boost function GB Parboiling takes place at power level 9 with the automatic boost function. [. . . ] The horizontal drive of the clips must be flush with the worktop (avoid the risk of breaks). · Position the hob according to the illustration on the left side (a), align it (b) and insert the clips (c). · Screws may be used to fasten the clips. There is a risk of breakage if the hob is canted or subjected to stress during installation! Minimum distance to adjacent walls Cut-out dimension Outer dimensions of the hob Cable routing in rear wall Installation height Bracket · Insert the hob and align it. [. . . ]