User manual SMEG IGSP600E

[. . . ] VENTILATION OR HEAT DISPERSAL IMMEDIATELY AFTER INSTALLATION CARRY OUT A BRIEF INSPECTION TEST OF THE APPLIANCE, FOLLOWING THE INSTRUCTIONS PROVIDED FURTHER ON. SHOULD THE APPLIANCE NOT WORK, DISCONNECT IT FROM THE SUPPLY AND CALL THE NEAREST TECHNICAL ASSISTANCE CENTRE. WHENEVER YOU FINISH USING IT, ALWAYS MAKE SURE THAT THE SWITCH IS IN THE O (OFF) POSITION. 11 Presentation NEVER INSERT INFLAMMABLE OBJECTS: THEY COULD BE ACCIDENTALLY IGNITED AND CAUSE FIRES. [. . . ] DO NOT REMOVE THIS PLATE FOR ANY REASON. THE APPLIANCE IS DESIGNED FOR PROFESSIONAL USE BY TRAINED PERSONS. KEEP CHILDREN AT A SAFE DISTANCE AND NEVER ALLOW THEM TO PLAY WITH IT. THE USE OF THIS APPLIANCE IS NOT PERMITTED TO PEOPLE (INCLUDING CHILDREN) OF REDUCED PHYSICAL AND MENTAL ABILITY, OR LACKING IN EXPERIENCE IN THE USE OF ELECTRICAL APPLIANCES, UNLESS THEY ARE SUPERVISED OR INSTRUCTED BY ADULTS OR PEOPLE RESPONSIBLE FOR THEIR SAFETY. THE APPLIANCE IS DESIGNED FOR A MAXIMUM LOAD OF 2 KG. THIS APPLIANCE IS MARKED ACCORDING TO EUROPEAN DIRECTIVE 2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE). THIS DIRECTIVE DEFINES THE STANDARDS FOR THE COLLECTION AND RECYCLING OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT APPLICABLE THROUGHOUT THE EUROPEAN UNION. BEFORE THE APPLIANCE IS PUT INTO OPERATION, ALL LABELS AND PROTECTIVE FILMS APPLIED INSIDE OR OUTSIDE MUST BE REMOVED. The manufacturer declines all responsibility for damage to persons or things caused by the non-observance of the above prescriptions or deriving from tampering with any part of the appliance or by the use of non-original spares. 12 Presentation 2. INSTRUCTIONS FOR DISPOSAL OUR ENVIRONMENTAL CARE Our product's packing is made of non-polluting materials, therefore compatible with the environment and recyclable. Please help by disposing of the packing correctly. The appliance is fitted with a H05RN-F three-core cable for operation at 230V and a power supply plug. The supplied cable is a H5RN-F 3 x 0. 75 mm2 three-core cable. The power supply cable must be replaced by the manufacturer or by an authorised service centre to prevent any risks. The terminal indicated by this symbol links up parts that are normally earthed. Connect the appliances appropriately using this terminal in order to make sure that they are equipotential. The plug and wall-mounted socket must be of the same type (in accordance with current regulations). Make sure that the supply line is suitably earthed. The manufacturer cannot be held liable for damage to persons or things caused by failure to observe the above instructions or deriving from tampering with any part of the appliance. 14 Instructions for the user 4. DESCRIPTION OF THE CONTROLS THERMOSTAT KNOB Allows you to select the most suitable heating temperature. The desired temperature is selected by turning the knob clockwise. [. . . ] The desired temperature is selected by turning the knob clockwise. Adjustment is progressive so that the oven also operates at any intermediate value. ON / OFF BUTTON Allows you to switch on the heating element inside the display unit. GREEN INDICATOR LIGHT When on, it indicates that the appliance is heating up. When the temperature set using the thermostat knob is reached, the light goes off. [. . . ]