User manual SMEG JLFSEC610

[. . . ] JLFSEC608 JLFSEC610 Multi function cooker Instruction manual Important safety information Thank you for purchasing this appliance. This manual is an integral part of the appliance and therefore must be kept in its entirety and in an accessible place for the whole working life of the cooker. Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. Installation must be carried out by qualified personnel in accordance with the regulations in force. [. . . ] (for example after 45 minutes) 1 Press the "cooking period" key, the display lights up, showing 00:00. 2 Use the or keys to set the desired cooking time. The `A' simbol will appear on the display, and the current clock time will be shown. After set-up, to see the cooking time remaining, press the "cooking period" key; to see the end of cooking time press the key "end time key". Before setting the programmer for semi/automatic cooking, activate the desired function and temperature. Set the clock: When using the oven for the first time, or after a power failure, the display flashes regularly and indicates 00:00. Press the keys "cooking period" key and "end time key" at the same time the keys or : each single press changes the time by 1 minute either up or down. 14 To set the oven to switch off automatically at a set time: Use this function if you have already started cooking and want the oven to switch-off at a set time. 1 Press the "end time" key, the display lights up, showing the current time. 2 Use the or keys to set the desired cooking end time. The `A' simbol will appear on the display, and the current clock time will be shown. After set-up, to see the cooking end time, press the "end time" key. will appear on the display, and the current clock time will be shown. 5 Select the oven function and temperature required for your dish. After set-up, to see the cooking time remaining, press the "cooking period" key; to see the end of cooking time press the "end time" key. At the end of automatic cooking When cooking is over, the oven will automatically switch off and, at the same time, an intermittent alarm will sound. Press the "minute timer" key to silence it. The alarm mode switches off automatically after seven minutes. They can be manually deactivated by pressing the "cooking period" key and "end time" key together. To switch off the appliance, rotate all the knobs to `0' position. To set the oven to start and finish at preset times: Use this function to start and finish cooking automatically. For example, the recipe may require 50 minutes cooking time and it will be ready at 20:00. In this case the programmer will calculate the start time to be at 19:10 and will start and end automatically. 1 Press the "cooking period" key, the display lights up, showing 00:00. 2 Use the or keys to set the desired cooking time. The `A' simbol will appear on the display, and the current clock time will be shown. 3 Select the time that the oven has to be switched off. Press the "end time" key, the display lights up, showing the current time. [. . . ] For electrical connections see following diagram. 25 For operation on 380-415V3N~ five-core cable (5 x 1. 5 mm²) 380-415V2N~ four-core cable (4 x 1. 5 mm²) 220-240V ~ three-core cable (3 x 2. 5 mm²) Cable type H05V2V2 by means of its four adjustable feet. The appliance must be properly levelled to ensure stability. Rear top skirtboard Caution!Always install the rear top skirtboard which is an integral part of the appliance. Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in case of operation from a 220240V power supply, with a three-core plug. Make sure that plug and wall socket are of the same type and are in conformity with regulations in force. [. . . ]