User manual SMEG JLFSMC609

[. . . ] JLFSMC607 JLFSMC609 Multi function cooker Instruction manual Important safety information Thank you for purchasing this appliance. This manual is an integral part of the appliance and therefore must be kept in its entirety and in an accessible place for the whole working life of the cooker. Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. Installation must be carried out by qualified personnel in accordance with the regulations in force. [. . . ] Press the keys "cooking period" key and "end time key" at the same time the keys or : each single press changes the time by 1 minute either up or down. 15 To set the oven to switch off automatically at a set time: Use this function if you have already started cooking and want the oven to switch-off at a set time. 1 Press the "end time" key, the display lights up, showing the current time. 2 Use the or keys to set the desired cooking end time. The `A' simbol will appear on the display, and the current clock time will be shown. After set-up, to see the cooking end time, press the "end time" key. will appear on the display, and the current clock time will be shown. 5 Select the oven function and temperature required for your dish. After set-up, to see the cooking time remaining, press the "cooking period" key; to see the end of cooking time press the "end time" key. At the end of automatic cooking When cooking is over, the oven will automatically switch off and, at the same time, an intermittent alarm will sound. Press the "minute timer" key to silence it. The alarm mode switches off automatically after seven minutes. They can be manually deactivated by pressing the "cooking period" key and "end time" key together. To switch off the appliance, rotate all the knobs to `0' position. To set the oven to start and finish at preset times: Use this function to start and finish cooking automatically. For example, the recipe may require 50 minutes cooking time and it will be ready at 20:00. In this case the programmer will calculate the start time to be at 19:10 and will start and end automatically. 1 Press the "cooking period" key, the display lights up, showing 00:00. 2 Use the or keys to set the desired cooking time. The `A' simbol will appear on the display, and the current clock time will be shown. 3 Select the time that the oven has to be switched off. Press the "end time" key, the display lights up, showing the current time. 4 Use the or keys to set the desired cooking end time. The `A' simbol 16 Erase of set data Once the programmer has been set, press the key of the function to be cancelled. Next press the key until the display shown 00:00. Time cancellation will be considered as end of cooking time by the programmer. Adjusting alarm volume The acoustic alarm has three different settings. [. . . ] When making the connection, make sure that no stress of any kind is applied to the cooker and that the hose does not touch any sharp edges. If connecting to LPG the bayonet hose must have red bands on it. Replacement of nozzles on the hob To change the nozzles, proceed as described below: 1 Extract the grids and remove all the caps and flame-spreader crowns; 2 Unscrew the burner nozzles with a 7 mm socket wrench; 3 Replace the nozzles according to the type of gas to be used 4 Replace the burners in the correct position. Adaptation to different types of gas Warning!Before performing any cleaning or maintenance work, disconnect the appliance from the mains. The cooker hob is preset for natural gas G20 (2H) at a pressure of 20 mbar. [. . . ]